Abstract:In this work, high-power tandem-pumped random fiber lasers are investigated in detail. A 6.5 W random fiber laser seed centered at 1070 nm with a half-open cavity structure was built. Boosted by two amplifier stages, the random fiber laser achieved a power of several kilowatts. Stimulated Raman scattering (SRS) mitigation is challenging in tandem-pumped fiber lasers. To suppress SRS, several methods were applied, including avoiding external feedback in the oscillator stage, incorporating a high core/cladding diameter ratio gain fiber, and using a band pass filter (BPF) to mitigate Raman noise. The latter proved to be the most effective method; therefore, SRS mitigation without and with a BPF was investigated at 3.5 kW, leading to suppression ratios rising from 14 to 30 dB. By increasing the pump power continuously to 5.6 kW, we realized a record output power of 5.1 kW, corresponding to an SRS suppression ratio of 27 dB. Owing to the high-brightness 1018 nm fiber lasers serving as the pump sources and the high gain coefficient in the second amplifier stage, the entire system demonstrated high efficiency and stability. At the maximum power level, the total optical-to-optical efficiency reached 89.0%. This work offers an economic and practical technique for realizing high-power and high-efficiency random fiber lasers with effective SRS mitigation, while the experimental results suggest the potential for further power scaling.

Coherent Beam Combining of Two Fiber Amplifiers Seeded by Multi-Wavelength Fiber Laser

Coherent Combining of Two Pulsed Solid State Lasers

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Experimental Demonstration of Efficient Coherent Combining of 19 Fiber Lasers By Adaptive Gain Coefficient SPGD Algorithm

Scalable structure of coherent polarization beam combining based on tapered diode laser amplifiers

Spectral Evolution and Stimulated Brillouin Scattering Suppression in Phase-Modulated Fiber Amplifier

Spectral Beam Combining of Fiber Lasers with 32 Channels

3 Kw Narrow-Linewidth All-Fiber Amplifier with Near Diffraction Limited Beam Quality

Stimulated Brillouin Scattering Suppression and Optical Parametric Amplification in Highly Nonlinear Optical Fiber

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Improving the beam quality of single-grating spectrally combined fiber lasers with adaptive optics

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

Coherent beam combining of two all-PM thulium-doped fiber chirped pulse amplifiers

5.1 Kw Tandem-Pumped Fiber Amplifier Seeded by Random Fiber Laser with High Suppression of Stimulated Raman Scattering

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Passive Phase Locking Coherent Combination of Solid-State Lasers through Stimulated Brillouin Scattering Effect

Coherent Beam Combination of Ultrafast Fiber Lasers

3.05 kW, 13.7 GHz linewidth fiber amplifier based on PRBS phase modulation for SBS suppression

A Hybrid Incoherent Sequence Combining of Pulsed Lasers Based on Refraction-Displacement-Pulsed-Combining and Polarization Beam Combining

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

Mitigating stimulated Brillouin scattering in multimode fibers with focused output via wavefront shaping