Abstract:This paper has investigated the harmful effects of Gamma irradiation on fiber communication system links under thermal environment effects over wide range of the operating parameters. Both the ambient temperature and the irradiation dose possess sever effects on the system transmission link characteristics and consequently the performance characteristics of optical communication systems. As well as we have deeply developed the modelling basics of transmission communication systems, which may be used to analyzed the total dispersion for first and second orders, system rise time, 3-dB bandwidth, transmitted signal bandwidth, transmission bit rates and products using different transmission techniques of these irradiated optical transmission communication systems after different irradiation fluences. I. Introduction The transmission characteristics of optical fiber are very much influenced in radiation environment due to generation of radiation induced defect centers by ionization and atomic displacement within the molecular bonding network of silica (SiO 2) glass [1, 2]. The generated defect centers cause absorption in Ultraviolet (UV), Visible (VIS) or near Infrared (IR) region and are responsible for radiation sensitivity of the fiber. The radiation induced loss in optical fiber depends largely on core clad composition, dopant concentration, fiber design along with different radiation parameters like radiation source, dose rate and operating parameters like temperature [3-5], transmission wavelength etc. Lot of work has been carried out to study the radiation effect on optical fibers and the associated defect centre generation with the objective of using the fiber as transmission medium in radiation environment which requires it to be radiation resistant. On the other hand the possibility of using the fiber as sensor under various radiation environments such as nuclear waste tanks, nuclear reactors etc has also been explored. For this the fiber should have radiation soft behaviour [6]. When optical fibers are exposed to nuclear or X ray radiation, the attenuation in the fibers increases due to the radiation induced ionization and formation of color centers. This effect can strongly reduce the performance of the fiber optic systems, such as fiber optic data transmission and fiber spectroscopy in nuclear environments, without compensation or careful design of systems. However, based on the dependence of the fiber loss on radiation dose, this mechanism can be explored to evaluate the use of optical fiber as radiation sensors [7, 8]. In the last two decades much research work has been conducted to study the radiation effects on optical fibers for the purposes of: using …

New model for assessing dose and dose rate sensitivity of Gamma ray radiation loss in polarization maintaining optical fibers

Roughness-induced Radiation Losses in Optical Micro or Nanofibers.

Radiation Damage Mechanisms and Research Status of Radiation-Resistant Optical Fibers: A Review

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Effect of Steady-state and Transient Γ Radiation on Ge-doped Quartz Optical Fiber

Harmful Effects of Gamma Irradiation on Optical Fiber Communication System Links Under Thermal Environment Effects

Effects of e-beam and gamma sterilization on attenuation of selected single-mode and mutimode optical fibers

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Experimental measurements of gamma-radiation effects on fiber-optic cables

High Sensitivity Long-Period Grating Tunable Filters in Standard Communication Fibers and Their Pdl Reduction

Optimal Design And Loss Mechanism Analysis Of Microwave Absorbing Unidirectional Sic Fiber Composites With Broad Absorption Band And Good Polarization Stability

Influence of spin–orbit coupling on the gamma-ray induced attenuation in high-OH silica fibers

Neutron versus Gamma Radiation Effects on Ytterbium-doped Optical Fibers

Approaches to mitigate polymer-core loss in plastic optical fibers: a review

<title>Measurement methods and statistics of polarization mode dispersion in optical transmission systems with polarization dependent loss</title>

Propagation Characteristics of Multi-Coating D-Shaped Optical Fibres

Measurement Methods and Statistics of Polarization Mode Dispersion in Optical Transmission Systems with Polarization Dependent Loss

Impact of gamma-ray radiation-induced photodarkening on mode instability degradation of an ytterbium-doped fiber amplifier

Experimental Investigation of Quasi-Static Mode Degradation in a High Power Large Mode Area Fiber Amplifier.

Potential of Germano-phosphosilicate Single Mode Optical Fibers for Dosimetry