Abstract:Ion chambers are required for calibration and reference dosimetry applications in radiation therapy (RT). However, exposure of ion chambers in ultra-high dose rate (UHDR) conditions pertinent to FLASH-RT leads to severe saturation and ion recombination, which limits their performance and usability. The purpose of this study was to comprehensively evaluate a set of commonly used commercially available ion chambers in RT, all with different design characteristics, and use this information to produce a prototype ion chamber with improved performance in UHDR conditions as a first step toward ion chambers specific for FLASH-RT. The Advanced Markus and Exradin A10, A26, and A20 ion chambers were evaluated. The chambers were placed in a water tank, at a depth of 2 cm, and exposed to an UHDR electron beam at different pulse repetition frequency (PRF), pulse width (PW), and pulse amplitude settings on an IntraOp Mobetron. Ion chamber responses were investigated for the various beam parameter settings to isolate their dependence on integrated dose, mean dose rate and instantaneous dose rate, dose-per-pulse (DPP), and their design features such as chamber type, bias voltage, and collection volume. Furthermore, a thin parallel-plate (TPP) prototype ion chamber with reduced collector plate separation and volume was constructed and equally evaluated as the other chambers. The charge collection efficiency of the investigated ion chambers decreased with increasing DPP, whereas the mean dose rate did not affect the response of the chambers (± 1%). The dependence of the chamber response on DPP was found to be solely related to the total dose within the pulse, and not on mean dose rate, PW, or instantaneous dose rate within the ranges investigated. The polarity correction factor (Ppol ) values of the TPP prototype, A10, and Advanced Markus chambers were found to be independent of DPP and dose rate (± 2%), while the A20 and A26 chambers yielded significantly larger variations and dependencies under the same conditions. Ion chamber performance evaluated under different irradiation conditions of an UHDR electron beam revealed a strong dependence on DPP and a negligible dependence on the mean and instantaneous dose rates. These results suggest that modifications to ion chambers design to improve their usability in UHDR beamlines should focus on minimizing DPP effects, with emphasis on optimizing the electric field strength, through the construction of smaller electrode separation and larger bias voltages. This was confirmed through the production and evaluation of a prototype ion chamber specifically designed with these characteristics.

A New Method for Measuring the Response Time of the High Pressure Ionization Chamber.

Study on Time Response Properties of Ionization Chamber in Profile Gauge

Measurement of Ion Drift Velocity in High-Pressure Gas Ionization Chamber

A Measure Method of the Time Respond Function for Gas Ionization Chamber

Method for Measuring Drift Velocity of Ions in High Pressure Gas

Measurement of ion and electron drift velocity and electronic attachment in air for ionization chambers

Influence on Measuring Ionization Chamber's Time Response Speed with Charge Integration Amplifying Circuit

A rapid response time gas detector with embedded glass plates for digital radiography systems

Evaluation of ion chamber response for applications in electron FLASH radiotherapy

The Proportional Ion Chamber and its Corresponding Circuit

A Simple Method for Measuring Electron Drift Velocity in Gases Using Grid Ionization Chamber

A fast response time gas ionization chamber detector with a grid structure

Study on New Method for Measurement of Internal Pressure of Vacuum Interrupters

A method for measuring the electron drift velocity in working gas using a Frisch-grid ionization chamber

Improved Method to Measure the Electron Drift Velocity Using the Frisch-grid Ionization Chamber

Measurement of the Rate Capability of Resistive Plate Chambers

Simulation of ionization charge carrier cascade time and density for a new radiation detection method based on modulation of optical properties

Design of a Gas Monitoring Chamber for High Pressure Applications

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas

Xenon-gas ionization chamber to improve particle identification of heavy ion beams with Z>70

Measurement of Electron-Drift Velocity in Ar+CH4 Mixtures With Double-Grid Method