Abstract:A micro flying slider is developed to satisfy the demands for large capacity, high data density, and fast transfer rate of mass storage systems. The air-bearing surface of the micro flying slider is designed based on micro fluid theory of hydrodynamics to obtain positive and negative pressures, thereby enhancing flying height stability. The lubrication model is investigated based on the generalized Reynolds equation. The finite volume method is utilized to solve the revised Reynolds equation that governs the air-bearing pressure and flying system behavior. The dynamic model for the slider–disk interface of the micro flying slider is developed, and the air-bearing system is modeled as a 3-degrees-of-freedom, lumped-parameter model to simulate flying characteristics. The air-bearing pressures with flying attitudes in the loading/unloading processes are characterized and calculated using the proposed model, with flying height and pitch angle as the key variables. The sample data obtained via accurate triggering and superposed averaging are processed to acquire modal frequencies and damping ratios based on the parameter identification method of modal analysis technique. System experiments are presented to illustrate the effectiveness of the proposed micro flying slider and its dynamic model for flying-height control. Theoretical analysis and experimental results show that a stable storage working process can be obtained at 1600 rpm and a pitch angle of 1.5°. Moreover, the micro flying slider exhibits satisfactory flying stability, with a near-field working distance of less than 75 nm. Good correlation between the experimental and simulation results is achieved.

Measurement and Suppression of Slider In-Plane Motion

Clearance Measurement of Commercial Slider

Precision Measurement of Z -Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-Probe Method

Clearance Measurement of Commercial Slider/disk with a Symmetrical Common-Path Heterodyne Interferometry

Anti Light Disturbance Analysis of the Measurement of High Precision micro Displacement

Experimental Study of the Slider-Lube/Disk Contact State and Its Effect on Head-Disk Interface Stability

Error Separation Method For Precision Measurement Of The Run-Out Of A Microdrill Bit By Using A Laser Scan Micrometer Measurement System

Fabrication and Flying Test of Silicon Sliders

Measurement of Simulated Disk/Slider Stationary Spacing by Common-Path Dual-Frequency Interferometry

Modeling, Design and Analysis of a Micro Flying Slider in Near-Field Optical Storage System

Numerical simulation of air sliders in an ultra sub-micron flying system

Dynamic Character of Ultra Thin Film Gas lubrication for Magnetic Head/Disk

Study on Micro-Scale Gas Slider Bearing w ith Direct Simulation Monte Carlo Method

On-machine Measurement of a Slow Slide Servo Diamond-Machined 3D Microstructure with a Curved Substrate

Experimental Study of Head-Disk Interface Flyability and Durability at Sub-1-nm Clearance

Flyability and Durability Test of Dynamic Fly-Height Sliders at 1-Nm Clearance

Moiré fringes-based measurement of radial error motion of high-speed spindle

Testing of Optical Disk Axial Run-Out and Tilt

Integrated Measurement Of Micro Motions For Mems Dynamic Performance Analysis

Methods for Reducing Subdivision Error within One Signal Period of Single-Field Scanning Absolute Linear Encoder

Dynamics of a Superconducting Linear Slider