Abstract:High-power, single-frequency lasers are important in the applications of coherent optical communication, Doppler wind lidar, and remote sensing. Here, a 10-kHz, 353-μJ, single-frequency, 574-ns, 1548-nm fiber laser system was demonstrated based on the optical pulse modulation. The 1548-nm, single-frequency seed laser with the linewidth of 1.25 kHz was modulated by two acousto-optic modulators (AOMs) into a 10-kHz pulsed laser. Two cascaded fiber amplifiers were spliced after the AOMs to scale up the pulse energy. The amplified spontaneous emission (ASE) was inhibited by the multistage amplification construction and the optical bandpass filters. A customized pulse profile was proposed to pre-compensate the temporal modulation and inhibit the stimulated Brillouin scattering (SBS) effect. The pulse duration of the amplified single-frequency pulse was 574 ns, with the peak power of 753 W. A numerical model was also built for investigating the dynamic of the interaction process inside the power amplifier. The simulated results indicate the maximum output power of the 10-kHz, customized single-frequency laser can be 3.984 W with a pulse duration of 381 ns.

150 W high-average-power, single-frequency nanosecond fiber laser in strictly all-fiber format.

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifier

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

1.2 kW, 20 kHz Nanosecond Nd:YAG Slab Laser System

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

High energy single-frequency double-pulse hybrid MOPA system

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

High Energy and High Peak Power Nanosecond Pulses Generated by Fiber Amplifier

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm