Abstract:In single photon emission computed tomography, it is a challenging task to maintain reasonable performance using only one specific collimator for radio-tracers over a broad spectrum of diagnostic photon energies, since photon scatter and penetration in a collimator differ with the photon energy. Frequent collimator exchanges are inevitable in daily clinical SPECT imaging, which hinders throughput while subjecting the camera to operational errors and damage. Our objective is to design a collimator, which independent of the photon energy performs reasonably well for commonly used radiotracers with low- to medium-energy levels of gamma emissions. Using the Geant4 simulation toolkit, we simulated and evaluated a parallel-hole collimator mounted to a CZT detector. With the pixel-geometry-matching collimation, the pitch of the collimator hole was fixed to match the pixel size of the CZT detector throughout this work. Four variables, hole shape, hole length, hole radius/width and the source-to-collimator distance were carefully studied. Scatter and penetration of the collimator, sensitivity and spatial resolution of the system were assessed for four radionuclides including 57Co, 99m Tc, 123I and 111In, with respect to the aforementioned four variables. An optimal collimator was then decided upon such that it maximized the total relative sensitivity (TRS) for the four considered radionuclides while other performance parameters, such as scatter, penetration and spatial resolution, were benchmarked to prevalent commercial scanners and collimators. Digital phantom studies were also performed to validate the system with the optimal square-hole collimator (23 mm hole length, 1.28 mm hole width, 0.32 mm septal thickness) in terms of contrast, contrast-to-noise ratio and recovery ratio. This study demonstrates promise of our proposed energy-optimized collimator to be used in a CZT-based gamma camera, with comparable or even better imaging performance versus commercial collimators such as low-energy high resolution (LEHR) and medium energy general purpose (MEGP) collimators.

A Numerical Model of a Coated Capillary-Plate Thermal Neutron Collimator

Parameters research of coated MCP thermal neutron collimator

Laser-Driven Collimated Neutron Sources Based on Kinematic Focusing

Design of moderator and collimator based on compact D-T neutron source for neutron imaging

Neutron collimator design of neutron radiography based on the BNCT facility

Realization of neutron sensitive MCP with ALD technique

Realization and evaluation of doping and coating neutron sensitive MCP

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Optimization and Thermal Analysis of Collinear Load on LINAC

Advanced manufacturing of 3D custom boron-carbide collimators designed for complex environments for neutron scattering

Neutron Detector Design Based on ALD Coated MCP

Ni-Ti supermirror coated onto a curved substrate for nested neutron-focusing optics

Numerical Analysis and Design of Collinear Load for S-band Linac Based on FeSiAl Material

Design of multi pinhole collimator system for SANS based on CPHS neutron source

Accurate Modeling Of Multi Knife-Edge Slit Collimator System Response For Mev Prompt Gamma Photons In Proton Therapy Monitoring

An energy-optimized collimator design for a CZT-based SPECT camera

High performance neutron passive imaging with a self-collimating neutron camera

Proof-of-concept for a thin conical X-ray target optimized for intensity and directionality for use in a carbon nanotube-based compact X-ray tube

Off-axis freeform surface reflective collimator for pumping in miniaturized NMR co-magnetometers

Impact of Wolfmet Tungsten Alloys as Parallel-Hole Collimator Material on Single-Photon Emission Computed Tomography Image Quality and Functional Parameters: A Simulating Medical Imaging Nuclear Detectors Monte Carlo Study

A Thermal Neutron Imaging Detector Using a Gd-doped Micro-Channel Plate