Abstract:Phase Measuring Deflectometry (PMD) with high dynamic range and high robustness is a more powerful method to achieve the integration of optical components fabrication and testing, which would avoid the secondary positioning error caused by the removal of optical components in off-line status. However, for surface shape measurement of transparent element, the captured fringe patterns are superposition of the patterns reflected from the front and rear surfaces, leading to the failure of the traditional phase-shifting algorithm to extract the true phase distribution. In order to separate the superposed fringe patterns, the limitations of the existing methods such as UV deflectometry and polarized light deflectometry, which require special light source and polarizer filter, are expensive instrument and complex processes. Moreover, only the front surface shape can be reconstructed at a time, which lowers the efficiency of the measurement. To achieve in-situ measurement of the front and rear surface shapes of the transparent element simultaneously, the combination of PMD and power spectrum estimation is used to separate parasitic fringe patterns. And the front and rear surface shapes are reconstructed using ray tracing and non-linear optimization. The feasibility of the proposed method is demonstrated by numerical simulation. In the experiment, the transparent element with a thickness of about 10 mm is detected and the front and rear surface shapes are reconstructed. The front and rear surface shapes differences of the transparent element with a diameter of 77.8 mm are 173 nm in RMS and 212 nm in RMS, respectively.

Aspheric surface measurement based on fringe reflection and analysis of system's structure

Research on Two Optical Methods for Aspheric Measurement

Surface Measurement Methods Based on Single and Multi-Frequency Fringes and Its Applications in Reverse Engineering

Phase calculation of smooth surface with multi-reflectivity based on phase measurement deflectometry.

Surface Shape Measurement of Transparent Planar Elements with Phase Measuring Deflectometry

A Novel Phase Measuring Deflectometry for Aspheric Mirror Test

Aspheric Mirror Measurement Based on Fringe Reflection

High-precision Measurement of Low Reflectivity Specular Object Based on Phase Measuring Deflectometry

Rotationally Asymmetric Figure Measurement of Optical Flat Using Rotational Shear Phase Measuring Deflectometry

Solution to the Slope-Height Ambiguity Problem in Phase Measuring Deflectometry Based on a Co-Axial Telecentric Optical Path

Study on Eliminating the Effect of Parasitic Reflection on Deflectometry Measurement of Planar Optical Element Surface Figure

Full-field 3D Shape Measurement of Specular Surfaces by Direct Phase to Depth Relationship

Three-Dimensional Shape Measurements of Specular Objects Using Phase-Measuring Deflectometry.

Phase Error Analysis and Reduction in Phase Measuring Deflectometry

Three-Dimensional Shape Measuring for Specular Surface Based on Phase Measuring Deflectometry

Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry.

A brief review of the technological advancements of phase measuring deflectometry

3D Shape Measurement of the Aspheric Mirror by Advanced Phase Measuring Deflectometry

Front and Back Surface Measurement of the Transparent Planar Element Based on Multi-Frequency Fringe Deflectometry

Parasitic Reflection Eliminating for Planar Elements Based on Multi-Frequency Phase-Shifting in Phase Measuring Deflectometry

In-situ Testing of Front and Rear Surfaces of Transparent Element