Abstract:As one of the most essential components of fuel cells, the commercialized Nafion-based proton exchange membranes(PEMs) suffer from several drawbacks like high cost and methanol permeability. The aim of this work is to fabricate a high performance PEM with combined low cost and methanol permeability together with high proton conductivity. Three-dimensional hierarchical molybdenum disulfide (MoS2) nanoflower is synthesized via a facile one-pot hydrothermal method, and then was embedd into sulfonated poly ether ether ketone (SPEEK) matrix to prepare composite PEM. The three-dimensional hierarchical architectures of MoS2 nanoflower can not only avoid the aggregation of MoS2 nanosheets but also provide abundant surface area and active sites, which are of benefit to fully take advantage of the intrinsic water absorption and methanol diffusion resistance ability of MoS2 nanosheets. The formed hydrogen bond network with water passway contributes to the improvement in proton conduction of composite membrane. As a consequence, composite membrane with 1 wt% MoS2 nanoflower loading content achieves optimized proton conductivity (0.123 S cm−1, 80 °C) and methanol permeability (21.5 × 10–7 cm2 s−1, 70 °C), which is 59.7% higher and 79.1% lower than that of SPEEK control membrane. Owing to increased proton conductivity and decreased methanol permeability, the maximum power density of the SPEEK/MoS2-1 composite membrane is 82.7 mW cm−2 at 70 °C, which is nearly 64.7% higher than that of pure SPEEK membrane (only 50.2 mW cm−2). Furthermore, the durability test confirms that the SPEEK/MoS2 composite membrane still possesses satisfactory stability even after continuous operation at 70 °C for 100 h.

Hybrid Polymers Based on Sulfonated Polynorbornene with Enhanced Proton Conductivity for Direct Methanol Fuel Cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

Hybrid Proton Conducting Membranes Based on Sulfonated Cross-Linked Polysiloxane Network for Direct Methanol Fuel Cell

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Hybrid acid–base polymer membranes prepared for application in fuel cells

A hybrid membrane of modified polybenzimidazole and heteropoly acid for direct methanol fuel cell

Zwitterion-functionalized nanofiber-based composite proton exchange membranes with superior ionic conductivity and chemical stability for direct methanol fuel cells

Simultaneous enhancement of proton conductivity and methanol resistance of sulfonated poly(phthalazinone ether sulfone ketone)/superacid sulfated zirconia composite membranes for direct methanol fuel cells

Proton exchange membranes modified with sulfonated silica nanoparticles for direct methanol fuel cells

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Using silica nanoparticles for modifying sulfonated poly(phthalazinone ether ketone) membrane for direct methanol fuel cell: A significant improvement on cell performance

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Enhanced proton conductivity assisted by sodium ions in the proton conductive hybrid membranes

High performance polymer electrolyte membrane with efficient proton pathway over a wide humidity range and effective cross-linking network