Abstract:Modification on PEMs to improve their thermal and chemical stability and to depress their methanol crossover is another approach to provide high performance PEMs. Organic-inorganic nanocomposites represent a useful approach to PEM modification. Layered clays and silica nanoparticles are two major inorganic reinforcements in PEM modifications. Clay incorporation into PEMs introduces a winding pathway for a methanol molecule to reduce their methanol crossover. The presence of silica nanoparticles in PEMs keep their hydrophilicity to maintaining water and improve their thermal and mechanical stability. The methanol crossover of PEMs is also depressed with formation of polyelectrolyte-silica nanocomposites as reduction of their swelling degree in methanol fuel solutions. Incorporation of nanosized inorganic reinforcements to proton exchange membranes, although brough about membrane stabilization, however would certainly lower their ion exchange capacity and proton conductivity. To overcome this problem, Lee et al prepared sulfonated montmorillonite to modify Nafion. The prepared composite membranes showed dramatic decreases in methanol permeability and comparable proton conductivity to pristine Nafion membranes. Bébin et al also used sulfonated Laponite particles to prepare Nafion/clay-SO3H composite membranes. The performance of the membrane-electrolyte assembly using the composite membrane is better than the one of a Nafion membrane. The above articles suggested that uses of sulfonated inorganic particles in preparation of polyelectrolytes nanocomposite membranes is an effective approach to improve the proton exchange membrane performances. Instead of clay, in this work silica nanoparticles and their sulfonated forms (silica-SO3H) were utilized in preparation of polyelectrolyte/silica nanocomposite membranes. Sulfonated poly(phthalazinone ether ketone) (sPPEK) with a high content of sulfonic acid groups is utilized as the proton conducting material. The properties of the prepared nanocomposite PEMs are examined and discussed. The chemical structures of sPPEK polyelectrolyte and silica-SO3H nanoparticles are shown in Figure 1. Mixing of these two substances in DMAc formed homogeneous and transparent solutions. sPPEK/silica-SO3H nanocomposite membranes possessing various silica-SO3H contents (NM-SA-X, X = silica-SO3H (g)/100g of sPPEK in solutions) were prepared from solution casting on glass plates. All obtained membranes showed high transparency, indicating the silica particles did not aggregate during membrane preparation.

Proton exchange membranes modified with sulfonated silica nanoparticles for direct methanol fuel cells

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Using silica nanoparticles for modifying sulfonated poly(phthalazinone ether ketone) membrane for direct methanol fuel cell: A significant improvement on cell performance

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels

Silica nano-particle/polyelectrolyte nanocomopsite membranes for direct methanol fuel cells

Hybrid Proton Conducting Membranes Based on Sulfonated Cross-Linked Polysiloxane Network for Direct Methanol Fuel Cell

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Hybird Membrane with High Proton Conductivity and Selectivity Based on Speek for Direct Methanol Fuel Cells

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

Simultaneous enhancement of proton conductivity and methanol resistance of sulfonated poly(phthalazinone ether sulfone ketone)/superacid sulfated zirconia composite membranes for direct methanol fuel cells

Novel Modification Method to Prepare Crosslinked Sulfonated Poly(ether Ether Ketone)/silica Hybrid Membranes for Fuel Cells

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

New Proton Exchange Membranes Based on Poly (vinyl Alcohol) for Dmfcs

Sulfonated Poly(ether Ether Ketone)/clay-So3h Hybrid Proton Exchange Membranes for Direct Methanol Fuel Cells

A nanocomposite proton exchange membrane based on PVDF, poly(2-acrylamido-2-methyl propylene sulfonic acid), and nano-Al2O3 for direct methanol fuel cells

Preparation and characterization of sPEEK/SiO2 hybrid proton exchange membrane

Properties of Composite Membranes Based on Sulfonated Poly(ether Ether Ketone)s (speek)/phenoxy Resin (PHR) for Direct Methanol Fuel Cells Usages

Cross Linked SPEEK/SiO_2 Hybrid Proton Exchange Membranes for Direct Methanol Fuel Cells