Abstract:The single-crystalline LiMn2O4 nanorods were successfully synthesized by a simple, low-cost and eco-friendly approach in which the γ-MnOOH nanorods were prepared through a facile hydrothermal process, in which KMnO4 was reduced by anhydrous alcohol (CH3CH2OH) without adding any template reagent or additional surfactant. The crystal structures and morphologies of synthesized materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The results showed that the γ-MnOOH nanorods had high crystallinity and well-shaped morphology with an average diameter of 200nm and an average length of 12μm. For the resulting LiMn2O4 nanorods, the electrochemical properties were investigated by galvanostatic charge-discharge test, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For the optimal LiMn2O4 nanorods, the initial discharge capacity was 123.5mAhg−1 and remained 110.2mAhg−1 after 100 cycles at 1.0C in the voltage range of 3.20∼4.35V. Moreover, the optimal LiMn2O4 nanorods can present superior rate performance, especially the capacity recovery performance as the charge-discharge rate restores to 0.1C from 5.0C. Such excellent electrochemical performance could make them to be the promising cathode material for high performance lithium-ion batteries.

Solvothermal Synthesis of Nano-Limnpo4 from Li3po4 Rod-Like Precursor: Reaction Mechanism and Electrochemical Properties

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Modifying High-Voltage Olivine-Type LiMnPO4 Cathode Via Mg Substitution in High-Orientation Crystal

Synthesis of Nano-Sized Limnpo4 and in Situ Carbon Coating Using A Solvothermal Method

High-performance LiMnPO4 nanorods synthesized via a facile EG-assisted solvothermal approach

Controllable Synthesis Of High-Performance Limnpo4 Nanocrystals By A Facile One-Spot Solvothermal Process

Solvothermal Synthesis of Nano LiMn0.9Fe0.1PO4: Reaction Mechanism and Electrochemical Properties

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries: Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Controllable preparation of nanosized LiMnPO4/C with rod‐like morphology by hydrothermal method with excellent electrochemical performance

Synthesis Of Limnpo4 Microspheres Assembled By Plates, Wedges And Prisms With Different Crystallographic Orientations And Their Electrochemical Performance

Controllable Synthesis of Limnpo4 Nanocrystals: Morphology Evolution and Their Size-Dependent Electrochemical Properties

Synthesis of Electrochemically Active LiMnPO4 Via MnPO4·H2O with Different Morphology Prepared by Facile Precipitation

Deep Eutectic Solvent Synthesis of LiMnPO4/C Nanorods as a Cathode Material for Lithium Ion Batteries

Solvothermal-assisted Morphology Evolution of Nanostructured LiMnPO 4 As High-Performance Lithium-Ion Batteries Cathode

Synthesis of Nano-LiMnPO4 from MnPO4·H2O Prepared by Mechanochemistry

Sol-Gel Synthesis and Electrochemical Performance of LiMnPO_4/C Cathode Material

A Simple, Low-Cost and Eco-Friendly Approach to Synthesize Single-Crystalline Limn2o4 Nanorods with High Electrochemical Performance for Lithium-Ion Batteries

High-performance porous nanoscaled LiMn2O4 prepared by polymer-assisted sol-gel method

High-yield synthesis of LiMnPO4/C nanoplates as cathode materials for lithium-ion batteries