Abstract:Eight typical LiMnPO4 nanocrystals with tunable morphologies have been controllably synthesized by varying the feeding sequence and the ratio of the reactants in an EG-assisted solvothermal approach. It is found that with the decrease of the OH− concentration induced by the primary LiOH/H3PO4 ratio, the predominately exposed planes of LiMnPO4 evolve from (010) for nanospindles to (100) for nanoplates in Li–P–Mn feeding sequence, and to both (010) and (100) for nanorods in Mn–P–Li feeding sequence. Further decrease of the OH− concentration hardly affects the formation of pure-phase LiMnPO4 but results in significant changes in the morphology with distinctly increased particle size. The electrochemical properties of the corresponding LiMnPO4/C composites are remarkably dependent on their particle size. By applying the Mn–P–Li sequence and the LiOH/H3PO4 ratio of 2.7–3.0, the as-prepared LiMnPO4/C nanorods exhibit superior rate capability (more than 105mAhg−1 at 10C) and remarkable cycling stability (a capacity retention of up to 93% after 100 cycles at 0.5C) among all the samples, owing to their small length of less than 60nm along the [010] direction. The results also confirm that excess LiOH amount is indeed required to yield LiMnPO4 crystals with small particle size and attractive electrochemical properties.

Synthesis Of Limnpo4 Microspheres Assembled By Plates, Wedges And Prisms With Different Crystallographic Orientations And Their Electrochemical Performance

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Modifying High-Voltage Olivine-Type LiMnPO4 Cathode Via Mg Substitution in High-Orientation Crystal

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries: Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Hydrothermal Synthesis of Stamen-Like Limnpo4 Nanostructures Self-Assembled with [001]-Oriented Nanorods and Their Application in Li-Ion Batteries

Microstructure and Electrochemical Characterization of Spherical-Like Orthorhombic LiMnO2 Via Co-Precipitation

Construction of LiMn2O4 Microcubes and Spheres Via the Control of the (104) Crystal Planes of MnCO3 for High Rate Li-ions Batteries

Preparation, Microstructure And Electrochemical Properties Of Spherical-Like Orthorhombic Limno2

Controllable Synthesis of Limnpo4 Nanocrystals: Morphology Evolution and Their Size-Dependent Electrochemical Properties

LiMn2O4 Microspheres Secondary Structure of Nanoparticles/plates As Cathodes for Li-ion Batteries

Solvothermal Synthesis of Nano-Limnpo4 from Li3po4 Rod-Like Precursor: Reaction Mechanism and Electrochemical Properties

Synthesis of Electrochemically Active LiMnPO4 Via MnPO4·H2O with Different Morphology Prepared by Facile Precipitation

Hydrothermal Synthesis of Well-Dispersed LiMnPO4 Plates for Lithium Ion Batteries Cathode

Shape-controlled Synthesis of LiMnPO4 via a Hydrothermal Route and Its Electrochemical Behavior in Lithium Ion Batteries

Controllable Synthesis Of High-Performance Limnpo4 Nanocrystals By A Facile One-Spot Solvothermal Process

Synthesis and Electrochemical Properties of LiMn2O4 and LiCoO2-coated LiMn2O4 Cathode Materials

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

Synthesis of Nano-Sized Limnpo4 and in Situ Carbon Coating Using A Solvothermal Method

Monodisperse Li1.2mn0.6ni0.2o2 Microspheres with Enhanced Lithium Storage Capability