Abstract:Metastable (Ti,Al)N thin films with face-centered cubic (fcc) structure are widely applied to protect tools and components used in the machining industry for their high hardness and exceptional thermal stability. Alloying is a simple but powerful strategy to further improve the performance of (Ti,Al)N thin films. Here, the combination of experiments and ab initio calculations allowed us to further improve the mechanical properties, thermal stability, and oxidation resistance of arc-evaporated (Ti,Al)N films through the addition of Nb and Ta. The developed Ti 0.40 Al 0.53 Nb 0.07 N, Ti 0.34 Al 0.52 Nb 0.14 N, Ti 0.40 Al 0.53 Ta 0.07 N, and Ti 0.34 Al 0.50 Ta 0.16 N thin films show a single-phase fcc structure like Ti 0.46 Al 0.54 N. While the hardness ( H ) of as-deposited (Ti,Al,Nb)N thin films is similar to that of Ti 0.46 Al 0.54 N (30.1 ± 0.4 GPa), it increases to 33.2 ± 0.7 and 34.1 ± 1.1 GPa by alloying with 7 and 16 at.% Ta (metal fraction), respectively. Both alloying elements allow to retard the spinodal decomposition of (Ti,Al)N, as suggested by X-ray diffraction of vacuum-annealed samples. The (Ti,Al)N and (Ti,Al,Nb)N samples exhibit the onset of wurtzite (w-) AlN formation at ~1050 °C, which is postponed to ~1200 °C for the (Ti,Al,Ta)N thin films. Ab initio calculations suggest that age hardening of (Ti,Al)N is improved by Nb and Ta, with Nb being more effective than Ta. This is verified by experiments showing that Ti 0.40 Al 0.53 Nb 0.07 N (Ti 0.34 Al 0.52 Nb 0.14 N) and Ti 0.40 Al 0.53 Ta 0.07 N (Ti 0.34 Al 0.50 Ta 0.16 N) experience an increase of H to 34.7 ± 0.5 GPa (36.7 ± 0.7 GPa) and 35.8 ± 1.0 GPa (37.0 ± 1.1 GPa) when annealed at 1000 °C, compared to the 32.4 ± 0.7 GPa of Ti 0.46 Al 0.54 N annealed at 900 °C. The relative H increase is thus higher for (Ti,Al,Nb)N than for (Ti,Al,Ta)N. Furthermore, Nb and Ta also improve the oxidation resistance of (Ti,Al)N with Ta being more effective than Nb. Based on these results we can conclude that both Nb and Ta elements improve hardness, thermal stability, and oxidation resistance of (Ti,Al)N, with Nb providing more relative hardness gain but Ta providing higher absolute values.

Preparation and characterization of TaNbTiW multi-element alloy films

Structure Evolution and Mechanical Properties of Ta–Nb–Ti–W–N Multielement Films

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Exploration of Homologous Substitution Element on Phase Ratio and High Temperature Properties in High Nb-containing TiAl Alloy

Influence of forging deformation and heat treatment on microstructure of Ti-xNb-3Zr-2Ta alloys

Enhancement of tensile properties of Ti2AlNb alloy added with Ta element

Microstructure and properties of intermetallic compounds of W/Ni/Ta diffusion couple

Structure and properties of multi-targets magnetron sputtered ZrNbTaTiW multi-elements alloy thin films

Effect of Ta Element on Microstructure Formation and Mechanical Properties of High-Nb TiAl Alloys

Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy

Ab initio supported development of Nb- and Ta-alloyed (Ti,Al)N thin films with improved thermal stability

Microstructures, Mechanical Behavior, and Radiation Damage of (Tivcr)X-(Taw)1-X Binary System High-Entropy Alloy Films

High-Throughput Preparation and Mechanical Property Screening of Zr-Ti-Nb-Ta Multi-Principal Element Alloys via Multi-Target Sputtering

Study on performance and microstructure of TiAlCrFeSiBN films

Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2AlC

Adjusting the /<sub>2</sub> and Ti<sub>2</sub>AlC phase on microstructure evolution and improving mechanical properties at room and elevated temperatures with the addition of Ta

Microstructure and Elevated Temperature Tensile Property of Ti–46Al–7Nb-(W,Cr,B) Alloy Compared with Binary and Ternary TiAl Alloy

Structure and properties of titanium-aluminum alloys doped with niobium and tantalum

Effect of tantalum addition method on microstructure and mechanical properties of the 90(W 20Ta)–Ni–Fe alloy

Individual and Synergistic Effects of Ta and Mn on Optimizing the Microstructures and Mechanical Properties of TiB Reinforced High Nb–TiAl Composites

Preparation, Microstructure, and Microhardness of Selective Laser-Melted W–3Ta Sample