Abstract:Based on its positive environmental impact, poly(lactic acid) (PLA) has been a gradual substitute for synthetic plastics used in diverse applications. The use of industrial limestone (ILS) as a filler in polymers can have advantages of changing the properties of pure polymers. Waste eggshells (WE) can be seen as an alternative filler to ILS as they are also a source of calcium carbonate. To assess the feasibility of both filler types and sizes, PLA composites were manufactured by injection molding with filler contents of 5, 10, and 20 wt.%. Tensile, flexural, and impact mechanical properties were evaluated in addition to water absorption. One-way analysis of variance (ANOVA) was performed to determine whether statistically significant differences among the measured mechanical properties existed. Scanning electron microscopy (SEM) was used to view the morphology of the fillers and fractured surfaces. The composite tensile strengths and flexural strengths performed the best when filler loadings were 5 wt.% and 10 wt.%, respectively, for both filler types. The tensile and flexural modulus both increased with filler loadings. The impact strength for the composites was obtained at a threshold level of 5 wt.% filler loadings for both filler types and slightly better for smaller particles sizes. ANOVA identified statistically significant differences for the mean mechanical property values evaluated. SEM showed the fractured surfaces of the PLA composites were different from the pure PLA indicating some transformation occurred to the matrix. The weight gains due to water absorption were observed to increase with increase in content of both filler types while the smaller particles had slightly higher water weight gains. Although the composites containing ILS fillers had somewhat enhanced mechanical properties over the WE-filled composites, the end application will dictate which filler type to use in PLA.

Bio-filler from Mussel Shell: Preparation and Its Effects on Polypropylene Composites Properties

Bio-filler from Waste Shellfish Shell: Preparation, Characterization, and Its Effect on the Mechanical Properties on Polypropylene Composites.

Preparation of Bio-Filler from Mussel Shell by Means of Mechanochemistry and Its Surface Properties

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

A Potential Bio-Filler: the Substitution Effect of Furfural Modified Clam Shell for Carbonate Calcium in Polypropylene

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Preparation of bio-filler from freshwater mussel shell and its surface property characterization

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste

Surface Properties Studies of Bivalve Shell Waste by the IGC Technique: Probing Its Significant Potential Application in the Polymer Industry

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

A promising and green strategy for recycling waste oyster shell powder as bio-filler in polypropylene via mycelium-enlightened interfacial interlocking

Preparation of Bio-filler from Pearl Oyster Shell and Its Surface Properties

Filling And Coloring Effect Of Pearl Shell Powder And Dye-Loaded Pearl Shell Powder On Polypropylene

New Polymer Biocomposites Based on Biopoly(Ethylene Terephthalate) and Waste Mollusc Shells

Mechanically Robust Wasted Seashell-Filled Poly(lactic acid)/poly(butylene adipate- co -terephthalate) Composite via In Situ Reactive Compatibilization and Conformational Transition

Seaweed As Novel Biofiller in Polypropylene Composites

Colorating and Mechanical Performance of Low-Density Polyethylene (Ldpe)/dye-Loaded Shell Powder (DPSP) Composites

Evaluation of MgO-ZnO-Crab Shell Biofillers as Reinforcement for Biodegradable Polylactic Acid (PLA) Composite

Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding

Bio-Based White Eggshell as a Value-Added Filler in Poly(Lactic Acid) Composites