Abstract:Shellfish shell as an aquaculture byproduct is usually abandoned randomly after consumption, leading to heartrending resource waste and severe environmental pollution. At present, blending waste seashell powder with biodegradable polymers is a potentially efficient method of green recycling, but the unsatisfactory mechanical properties from poor interfacial compatibility and serious filler agglomeration limit its potential application. Here, a multifunctional epoxy-based chain extender was used as an in situ reactive compatibilizer to reinforce the interaction of poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) composites filled with waste seashell powder (WSP) via the straightforward melting blend, followed by the annealing treatment above the glass transition temperature. Surprisingly, the epoxy groups in chain extenders could not only react with the terminal groups in PLA and PBAT but also interact with hydroxyl-rich WSP for efficient in situ compatibilization. In addition, induced by the annealing treatment at 80 °C, the formation of a high-energy gauche–gauche (gg) conformer in PLA molecules further improved the impact properties of the composite. Ultimately, under the synergy between enhanced interphase combination and increased gg conformer, the tensile strength and impact strength increased by 53 and 76%, respectively, compared to that of the sample without compatibilization and annealing. Green composites are highly suitable for packaging products because of their obvious advantages, including reliable mechanical performance, cost-effectiveness, and biodegradability. This work introduced an implementable and efficient route for the upcycling of waste seashells.

Surface Properties Studies of Bivalve Shell Waste by the IGC Technique: Probing Its Significant Potential Application in the Polymer Industry

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Finite Dilution Inverse Gas Chromatography as a Versatile Tool To Determine the Surface Properties of Biofillers for Plastic Composite Applications.

Bio-filler from Waste Shellfish Shell: Preparation, Characterization, and Its Effect on the Mechanical Properties on Polypropylene Composites.

A Potential Bio-Filler: the Substitution Effect of Furfural Modified Clam Shell for Carbonate Calcium in Polypropylene

Bio-filler from Mussel Shell: Preparation and Its Effects on Polypropylene Composites Properties

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

Preparation of Bio-Filler from Mussel Shell by Means of Mechanochemistry and Its Surface Properties

Preparation of bio-filler from freshwater mussel shell and its surface property characterization

Colorating and Mechanical Performance of Low-Density Polyethylene (Ldpe)/dye-Loaded Shell Powder (DPSP) Composites

A critical review of cast-off crab shell recycling from the perspective of functional and versatile biomaterials

Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste

Mechanically Robust Wasted Seashell-Filled Poly(lactic acid)/poly(butylene adipate- co -terephthalate) Composite via In Situ Reactive Compatibilization and Conformational Transition

Bivalve Shell: Not an Abundant Useless Waste but a Functional and Versatile Biomaterial

Study on the Surface Properties of Colored Talc Filler (CTF) and Mechanical Performance of CTF/acrylonitrile-butadiene-styrene Composite

Filling And Coloring Effect Of Pearl Shell Powder And Dye-Loaded Pearl Shell Powder On Polypropylene

A promising and green strategy for recycling waste oyster shell powder as bio-filler in polypropylene via mycelium-enlightened interfacial interlocking

Preparation of Bio-filler from Pearl Oyster Shell and Its Surface Properties

Surface modification of phosphogypsum and application in polyolefin composites

Mechanical and Thermal Properties of Low Density Polyethylene Composites Filled with Dye-Loaded Shell Powder