Microscale 1–3-Type Lead-Free Piezoelectric/ferrite Composites Fabricated by a Modified Dice-and-fill Method

Ying Xu,Jing-Feng Li,Jing Ma,Ce-Wen Nan

DOI: https://doi.org/10.1088/0022-3727/45/31/315306

2012-01-01

Abstract:This paper introduces a facile method to fabricate magnetoelectric (ME) composites with microscale lead-free piezoceramic pillars embedded in a ferrite matrix without high-temperature co-sintering. The microscale piezoceramic pillars with a sectional width of about 150 mu m were obtained from lead-free piezoceramic discs by a dicing method. The spacing between the pillars was backfilled with cobalt ferrite (CFO) nanoparticles, and then a liquid epoxy was infiltrated into the backfilled spacing to bond the filled particles and the pillars. The ME property of the resultant 1-3-type piezoelectric/ferrite composites was verified and found to be significantly dependent on the filling density of the CFO powder, which could be adjusted by repeating the filling step. A maximum ME voltage response of up to 302 mu VOe-(1) was obtained in a 700 mu m high composite with pillars of 150 mu m width and 200 mu m spacing. The present method provides a potential way to fabricate finescale multiferroic composites for microdevice applications.