Abstract:Cr–Al-based oxynitride materials have attracted significant attention as hard protective coatings for decades. However, knowledge of the influence of the constituents on oxidation behavior is limited. Here, Cr–Al–O–N coatings with various Cr/Al ratios prepared using cathodic arc evaporation were studied with respect to their microstructure, mechanical properties, and oxidation behavior. With a decrease in the Cr/Al ratio, the coatings yielded a phase evolution from face-centered cubic CrN to rock salt-type cubic (Cr, Al) 2 O 3 to a wurtzite-type hexagonal AlN structure. The cubic structured coatings showed a comparable indentation hardness, much higher than that of the Cr-free Al–O–N coating with a wurtzite structure. Thermogravimetric together with differential scanning calorimetric (TG-DSC) analysis revealed that the ternary Cr–O–N and Al–O–N coatings were more susceptible to oxidation than the quaternary Cr–Al–O–N coatings. Moreover, isothermal oxidation experiments indicated that the addition of 66 at.% Al within the metallic species gives rise to the growth of an Al-rich oxide scale on top of the Cr–Al–O–N coating. However, this oxide scale containing substantial voids cannot prevent the underlying coating from oxidation. Oxidation kinetics study illustrates that the oxidation activation energies of (Cr x Al 1−x )–O–N coatings with x = 1.00, 0.76, 0.58, 0.33, and 0 are 252.3, 305.2, 370.7, 303.8, and 297.7 kJ/mol, respectively. The best oxidation resistance was obtained by the (Cr 0.58 Al 0.42 )–O–N coating, whereas the Al-containing (Cr 0.33 Al 0.67 )–O–N coating showed inferior oxidation resistance owing to its high intrinsic oxygen fraction.

Oxidation Resistance of Quintuple Ti-Al-Si-C-N Coatings and Associated Mechanism

Oxidation Behavior of Ti–B–C–N Coatings Deposited by Reactive Magnetron Sputtering

On the Oxidation Resistance of Superhard Ti–Si–C–N Coatings

Influence of Oxidation on the Structural and Mechanical Properties of TiAlSiN Coatings Synthesized by Multi-Plasma Immersion Ion Implantation and Deposition

Investigation of the Role of Silicon in TiAlSiN Coating Deposited on TiAl Alloys during Long-term Oxidation

Improving oxidation resistance of γ-TiAl based alloy by depositing TiAlSiN coating: Effects of silicon

On the high temperature oxidation behavior of AlCrBN/TiAlNbSiN multilayer coatings with addition of boron and silicon

Oxidation Resistance of （ti,al,cr）n Coatings at 800 ℃

Microstructure, Mechanical Properties, and Oxidation Resistance of Nanocomposite Ti–Si–N Coatings

High-temperature resistance and self-lubricating TiAlTaCN nanocomposite hard coating by synergistic interaction of TiAlN(C) and TaN(C) phases

High Temperature Oxidation Behaviors of Al/Cr Composite Coating on Ti2AlNb Alloy

Oxidation resistance of (Ti,Al,Cr)N coatings at 800 ℃

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

Combined Effect of Aluminum Content and Layer Structure on the Oxidation Performance of Ti1-Xalxn Based Coatings

Oxidation Performance of Nano-Layered (AlTiZrHfTa)Nx/SiNx Coatings Deposited by Reactive Magnetron Sputtering

Microstructure, mechanical properties, and oxidation behavior of arc-evaporated Cr–Al–O–N coatings with various Cr/Al ratios

Enhancing High-Temperature Oxidation Resistance of Ti6Al4V Alloy by Simple Surface Aluminization

Microstructure and Tribological Behavior of TiAlSiN Coatings Deposited by Deep Oscillation Magnetron Sputtering

Analysis of oxidation behavior of laser cladding SiC-Ti based composite strengthening coating

Oxidation Behaviour of Sputter-Depositedni–cr–al Micro-Crystalline Coatings

Improving the high temperature oxidation resistance of TiAl alloy by SiOC coating