Abstract:This article provides information about the sizing and standardization of a Faraday cup (FC) used as a plasma diagnostic. This instrument is used to accurately map the ion beam profile produced by an electric propulsion (EP) device. A FC is a cylindrical probe that uses an electrode, termed collector, to measure the current. Several studies have shown the relevance of adding an extra electrode, called collimator, to define the collection area and to minimize interactions with the ambient plasma. Both the electrodes are encapsulated into an isolated metallic housing that prevents ambient plasma from disturbing the measurements. In this case study, a field-emission-electric propulsion (FEEP) thruster is used. The FEEP technology uses electrostatic fields to extract liquid metal (indium) ions from a sharp surface and accelerates them to high velocities, providing thrust. The FEEP model used in this study is the ENPULSION NANO thruster from the Austrian company Enpulsion. We present results focusing on the sizing of a FC in terms of cup length, aperture diameter, and collection solid angle as well as on the material exposure to the ion beam. For a far-field ion beam study of a FEEP indium based electric thruster, our study outcomes show that a FC optimum sizing is a 50 mm long collector cup and a 7 mm wide inlet aperture. Moreover, shielding the repeller/collimator from direct exposure to the ion beam seems to greatly minimize perturbation during ion current acquisition. Finally, to only measure the ion current, a negative potential should be applied to the collector and repeller, where the latter is more negative. This study contributes to the effort on diagnostic standardization for EP device characterization. The goal is to enable repetitive and reliable determination of thruster parameters and performances.

Faraday Cup for Measuring the Electron Beams of Twt Guns

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Automated pinhole-aperture diagnostic for the current profiling of TWT electron beams

Realization of a Large-Acceptance Faraday Cup for 3 MeV Electrons

Variable Beam Entrance Faraday Cup System for Pulsed Electron Beam Current Profile Characterization.

Fast Time Response Full Absorption Faraday Cup and Its Application in the Measurement of Intensive Electron Beam Diodes

Development of 1.3 GHz Medium- (=0.634) Disk-Loaded Deflecting Cavity for 150 keV Electron Beam

Faraday cup sizing for electric propulsion ion beam study: Case of a field-emission-electric propulsion thruster

A Novel Tunable PCM Focusing System for a 220 GHz Sheet Beam Electron Gun

A Sheet Beam Electron Gun Using Thermal Emission with Large Beam Current for 0.22 THz Traveling-Wave Tubes

Experiment for Evaluating a K -Band Space TWT Electron Beam

A PEPPER-POT BASED DEVICE FOR DIAGNOSTICS OF THE SINGLE-SHOT BEAM*

A Method of Measuring the Incidence Angle of Intense Electron Beam

High Emission Current Density Electron Gun for a 263 GHz Sheet Beam Traveling Wave Tube

Design and Experimental Demonstration of a Circular Beam Electron Gun and a PPM System for D-Band TWTs

Design, Fabrication, and Beam Commissioning of a 216.667 MHz Continuous-Wave Photocathode Very-High-frequency Electron Gun

A Picosecond Pulsed Cold-Cathode Electron Gun for Ultrafast Electron Characterization and High-Frequency Radiation Source Applications

Design and Analysis of Electron Beam of 0.67 THz Traveling Wave Tube

High quality single shot ultrafast MeV electron diffraction from a photocathode radio-frequency gun.

A SINGLE-SHOT BEAM CHARACTERIZATION DEVICE BASED ON THE PEPPER-POT PRINCIPLE*

A Method for Detecting High Energy Density Electron Beams in Traveling Wave Tubes