Abstract:An efficient finite element analysis/computational fluid dynamics (FEA/CFD) thermal coupling technique has been developed and demonstrated. The thermal coupling is achieved by an iterative procedure between FEA and CFD calculations. Communication between FEA and CFD calculations ensures continuity of temperature and heat flux. In the procedure, the FEA simulation is treated as unsteady for a given transient cycle. To speed up the thermal coupling, steady CFD calculations are employed, considering that fluid flow time scales are much shorter than those for the solid heat conduction and therefore the influence of unsteadiness in fluid regions is negligible. To facilitate the thermal coupling, the procedure is designed to allow a set of CFD models to be defined at key time points/intervals in the transient cycle and to be invoked during the coupling process at specified time points. To further enhance computational efficiency, a “frozen flow” or “energy equation only” coupling option was also developed, where only the energy equation is solved, while the flow is frozen in CFD simulation during the thermal coupling process for specified time intervals. This option has proven very useful in practice, as the flow is found to be unaffected by the thermal boundary conditions over certain time intervals. The FEA solver employed is an in-house code, and the coupling has been implemented for two different CFD solvers: a commercial code and an in-house code. Test cases include an industrial low pressure (LP) turbine and a high pressure (HP) compressor, with CFD modeling of the LP turbine disk cavity and the HP compressor drive cone cavity flows, respectively. Good agreement of wall temperatures with the industrial rig test data was observed. It is shown that the coupled solutions can be obtained in sufficiently short turn-around times (typically within a week) for use in design.

Numerical analysis of two-dimensional fluid/thermal structure loosely-coupled simulation

Numerical Simulation of Hypersonic Thermochemical Nonequilibrium Flows Using Nonlinear Coupled Constitutive Relations

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Coupled Flow-Thermal-Structural Analysis of Hypersonic Aerodynamically Heated Cylindrical Leading Edge

Numerical study on the non-equilibrium characteristics of high-speed atmospheric re-entry flow and radiation of aircraft based on fully coupled model

Numerical simulation of three dimensional supersonic and hypersonic unsteady flow fields

Simulation of Flow and Heat Transfer in Micro Couette Flow

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

A Three-Dimensional Fictitious Domain Method for Direct Numerical Simulations of Particle-Laden Flows with Heat Transfer

An immersed boundary method for the thermo–fluid–structure interaction in rarefied gas flows

An immersed boundary method for the fluid--structure--thermal interaction in rarefied gas flow

Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications

Fluid-thermal-structural interaction of aerodynamically heated leading edges

Modeling and Analysis of Fluid-Solid Coupling Heat Transfer and Fluid Flow in Transonic Nozzle

Loosely coupled fluid/solid heat transfer analysis using a dynamic HTC approach

Partitioned Coupled Heat Transfer Fluid-Structure Interaction for Transient and Steady State Analysis of Aero Engines Applications

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Three-dimensional numerical simulation on flow and heat transfer in spirally inner finned tubes

Coupled Fluid-Thermal-Solid Simulation of Axial Through-Flow Rotating Cavities

A multi-stage coupling adaptive method for thermochemical nonequilibrium gas