Abstract:Titanium alloys fabricated by laser directed energy deposition (LDED) are usually subjected to sub-critical annealing to improve mechanical properties. This work mainly investigated the texture evolution of LDEDed Ti–6Al–2Zr–1Mo–1V alloy during sub-critical annealing and its effect on the anisotropy of yield strength. Results indicated that <0001> of α phase in the as-deposited sample exhibited two types of circle-shaped texture, which were perpendicular to the deposition direction (VD) and 45° away from VD, respectively. The intensities of these two types of texture were approximately equal because the α texture in the as-deposited sample were transformed from the strong <001>β//VD fiber texture following Burgers orientation relationship with weak variant selection. During sub-critical annealing, the formation of primary α phase, which tended to be transformed from the {110}β parallel to VD, led to the intensity of circle-shaped texture perpendicular to VD greater than that 45° away from VD. The calculation results suggested that all basal and prismatic slip systems of some α variants transformed from the {110}β parallel to VD were in hardly-activated orientation with Schmid factor (m) equal to zero for loading along the horizontal direction (HD), the slip systems of some α variants transformed from the {110}β 45° to VD were in hardly-activated orientation with m = 0 for loading along 45° direction (OD), while the systems of all α variants were in easily-activated orientation with high Schmid factors for loading along VD. After sub-critical annealing, the content of α phase in hardly-activated orientation increased for loading along HD but decreased for loading along OD, resulting in a smaller difference of yield strength between OD and VD or HD.

Microstructure Evolution of Sub-Critical Annealed Laser Deposited Ti–6Al–4V Alloy

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure and forming mechanism of a laser melting deposited TC4 titanium alloy after sub-critical annealing

Effect of Annealing Temperature on the Notch Impact Toughness of a Laser Melting Deposited Titanium Alloy Ti–4Al–1.5Mn

Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Deposited Ti60A Alloy

Effect of annealing treatment on microstructure and tensile properties of Ti-48Al-2Cr-5Nb alloy fabricated by laser additive manufacturing

Microstructure And Tensile Properties Of Laser Melting Deposited Ti-5al-5mo-5v-1cr-1fe Near Beta Titanium Alloy

Texture Evolution, Phase Transformation Mechanism and Nanohardness of Selective Laser Melted Ti-45Al-2Cr-5Nb Alloy During Multi-Step Heat Treatment Process

Effect of Annealing Temperatures on Microstructure and Mechanical Properties of Laser Melting Deposited TA15 Titanium Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Melting Deposited High Temperature Titanium Alloy Ti60A

Microstructure and mechanical properties of laser additive manufactured novel titanium alloy after heat treatment

Microstructure Evolution and Mechanical Properties of Laser Additive Manufactured Ti–5Al–2Sn–2Zr–4Mo–4Cr Alloy

Microstructure Evolution of Laser Deposited Ti60A Titanium Alloy During Cyclic Thermal Exposure

Microstructure and Phase Transformations of Laser Deposited High Temperature Titanium Alloy Ti60A

Subtransus Triplex Heat Treatment of Laser Melting Deposited Ti–5Al–5Mo–5V–1Cr–1Fe Near Β Titanium Alloy

Effects of Annealing Temperature and Cooling Rate on Microstructures of a Novel Titanium Alloy Ti–6Al–2V–1.5Mo–0.5Zr–0.3Si Manufactured by Laser Additive Manufacturing

Microstructure Evolution and Mechanical Properties of a Ti-45Al-8.5Nb-(W, B, Y) Alloy Obtained by Controlled Cooling from a Single Β Region

Obtaining bimodal microstructure in laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy

Effect of heat treatment on microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Texture Evolution During Sub-Critical Annealing and Its Effect on Yield Strength Anisotropy of Laser Directed Energy Deposited Ti-6Al-2Zr-1Mo-1V Alloy

Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatment