Abstract:Magnesium matrix composites reinforced with a network of TiC and TiB2 compounds have been successfully synthesized via an in-situ reactive infiltration technique. In this process, the ceramic reinforcing phases, TiC and TiB2, were synthesized in-situ from the starting powders of Ti and B4C without any addition of a third metal powder such as Al. The molten AZ91 magnesium alloy infiltrates the preform of 3Ti–B4C by capillary forces. Furthermore, adding different weight percentages of MgH2 powder to the 3Ti–B4C preforms was used in an attempt to increase the Mg content in the fabricated composites. The results reveal a relatively uniform distribution of the reinforcing phases in the magnesium matrix with very small amounts of residual Ti, boron carbide and intermediate phases when they are fabricated at 900 °C for 1.5 h using a 3Ti–B4C preform with 70% relative density. On the other hand, after adding MgH2 to the 3Ti–B4C preform, TiCx and TiB2 formed completely without any residual intermediate phases with the formation of the ternary compound (Ti2AlC) at the expense of TiC. The percentage of reinforcing phases can be tailored by controlling the weight percentages of MgH2 powder added to the 3Ti–B4C preform. The results of the in-situ reaction mechanism investigation of the Ti–B4C and Mg–B4C systems show that the molten magnesium not only infiltrates through the 3Ti–B4C preform and thus densifies the fabricated composite as a matrix metal, but also acts as an intermediary making the reaction possible at a lower temperature than that required for solid-state reaction between Ti and B4C and accelerates the reaction rate. The investigation of the in-situ reaction mechanism with or without the addition of MgH2 powder to the 3Ti–B4C preforms reveals similar mechanisms. However, the presence of the MgH2 in the preform accelerates the reaction resulting in a shorter processing time for the same temperatures.

A Developed Method for Fabricating In-Situ TiC p /Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration

A developed method for producing in situ TiC/Al composites by using quick preheating treatment and ultrasonic vibration

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

Fabrication of in situ Al3Ti/Al composites by using ultrasound assisted direct reaction between solid Ti powders and liquid Al

NewIn-situ Synthesis Method of Magnesium Matrix Composites Reinforced with TiC Particulates

Fabrication of an In-Situ Ti-2.6vol%Tic Metal Matrix Composite by Thermomechanical Consolidation of A Tih2-1vol%Cnts Powder Blend

In-situ synthesis of TiC/Mg composites and its damping capacity

Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites

Microstructural Evolution of Reinforcements in the Remelting in Situ TiC/Al–12Si Composites Treated by Ultrasonic Vibration

On the Supplementation of Magnesium and Usage of Ultrasound Stirring for Fabricating in Situ TiB2/A356 Composites with Improved Mechanical Properties

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in situ TiB2p/Al-12Si-4Cu composites

Microstructure and Phase Evolution Characteristics of the In Situ Synthesis of TiC-Reinforced AZ91D Magnesium Matrix Composites

A Novel Fabrication Technology of in Situ TiB2/6063Al Composites: High Energy Ball Milling and Melt in Situ Reaction

Preparation and Mechanical Properties of in Situ Submicron MgAl2O4p/6061Al Composites from Al–Mg–SiO2 System

Microstructure and Mechanical Properties of in Situ Synthesised (Tic+tib)/ti-6Al-4v Composites Prepared by Powder Metallurgy

Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system

Processing of in situ aluminum-matrix composites and controlling of the solidification microstructures

Preparation of in Situ Synthesis TiC/Ti6Al4V Composite Powder with Homogeneous Dispersion by Electrode Induction Gas Atomization Method

Understanding the reaction mechanism of in-situ synthesized (TiC–TiB2)/AZ91 magnesium matrix composites

In Situ Synthesis of Ti2AlC–Al2O3/TiAl Composite by Vacuum Sintering Mechanically Alloyed TiAl Powder Coated with CNTs