Abstract:Examining various properties of PP/EPDM TPV enhanced with interfacial compatibilizers and cellulose nanocrystals, while establishing correlations between morphology and these properties. In this study, dynamically vulcanized thermoplastic elastomer nanocomposites consisting of polypropylene (PP) as the thermoplastic matrix, ethylene propylene diene monomer (EPDM) rubber as the dispersed phase, and needle‐like cellulose nanocrystals (CNC) were investigated. The two polymers were melt blended in a ratio of 70/30 (PP/EPDM) and 60/40% w/w (PP/EPDM) together with CNC (2, 3, and 5 phr) and sulfur‐curing system. The potential of EPDM‐g‐MA and PP‐g‐MA's as interfacial compatibilizers for enhancing interfacial interactions between components and partitioning of CNC between the two polymer phases was examined by measuring the decrease in the size of EPDM particles. The resulting thermoplastic vulcanizates (TPV) were characterized using a melt rheometric mechanical spectrometer (RMS), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and tensile tests. The inclusion of any type of interfacial compatibilizers led to enhanced tensile properties when compared to the samples lacking compatibilizers in both TPVs and TPEs in different ratios. EPDM‐g‐MA was found to be more effective for 60/40% w/w (PP/EPDM) TPVs, while PP‐g‐MA showed higher potential for 70/30% w/w TPVs. The CNC‐reinforced TPVs displayed higher melt elasticity than their unloaded counterparts. These nanocomposites also showed reduced EPDM particle size, enhanced Young modulus, and a higher degree of crystallinity. Highlights Nanocomposite thermoplastic vulcanizates (TPVs): polypropylene (PP)/ethylene propylene diene monomer (EPDM)/cellulose nanocrystals (CNC) with matrix‐dispersed morphology. Interfacial enhancement: Compared EPDM grafted maleic anhydride (EPDM‐g‐MA) and PP‐g‐MA potentials. Tensile properties: EPDM‐g‐MA is more effective in higher rubber content TPVs. Mechanical enhancements: Improved properties and Young's modulus in CNC‐filled TPVs. Diverse applications: PP/EPDM/CNC nanocomposites in auto, electrical, electronic, and packaging industries.

PP/EPDM-based Dynamically Vulcanized Thermoplastic Olefin with Zinc Dimethacrylate: Preparation, Rheology, Morphology, Crystallization and Mechanical Properties

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties

High-Performance Olefin Thermoplastic Elastomer Based on Dynamically Cross-Linking Crystalline Macromers and Elastic Backbones

In Situ Reactive Compatibilization and Reinforcement of Peroxide Dynamically Vulcanized Polypropylene/ethylene‐propylene‐diene Monomer Tpv by Zinc Dimethacrylate

Highly Toughened Polypropylene/ethylene–propylene-Diene Monomer/zinc Dimethacrylate Ternary Blends Prepared Via Peroxide-Induced Dynamic Vulcanization

Ethylene propylene diene monomer/polypropylene thermoplastic elastomer modified with in situ prepared zinc dimethacrylate

Preparation and Properties of Peroxide Dynamically Vulcanized Poly(vinylidene Fluoride)/silicone Rubber/zinc Dimethacrylate Composites

Study on PP/EPDM Blend Toughened by Dynamic Vulcanization

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Effect of Additives on the Morphology Evolution of EPDM/PP TPVs During Dynamic Vulcanization in a Twin-Screw Extruder

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Dynamically Vulcanized Ethylene Propylene Diene Terpolymer/nylon Thermoplastic Elastomers

The Effect of Lanthanum Trimethacrylate on the Mechanical Properties and Flame Retardancy of Dynamically Vulcanized PP/EPDM Thermoplastic Vulcanizates

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Morphological structure of dynamically vulcanized thermoplastic elastomer of ethylene propylene diene monomer/polypropylene

Dynamically vulcanized CNC‐reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization

Properties and Unique Morphological Evolution of Dynamically Vulcanized Bromo-Isobutylene-isoprene Rubber/polypropylene Thermoplastic Elastomer

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Effect of Rubber Nanoparticle Agglomeration on Properties of Thermoplastic Vulcanizates During Dynamic Vulcanization.

Manufacturing Polypropylene (pp)/waste EPDM Thermoplastic Elastomers Using Ultrasonically Aided Twin-Screw Extrusion