Abstract:Revealing the microstructural parameters-mechanical properties relationship is very critical for the microstructure tailoring and properties optimization of titanium alloy. In this work, the dependence of mechanical properties on microstructural parameters of TA15 titanium alloy with tri-modal microstructure was investigated. The results indicate that at a certain lamellar α (αl) content (28%), both of yield strength (σ0.2) and ultimate tensile strength (σb) decrease continuously with the increase of equiaxed α (αp) content, while the decrease speed slows down at higher αp content. At a certain content of αp of 20%, σ0.2 and σb both increase first and then decrease as the content of αl increases. The above effect laws result from the competition between the softening effect caused by increasing the softer αp and αl contents and the strengthening effect relating to αl/βt interfaces and βt hardening. As for the elongation (δ) and reduction of area (Φ), they show an increase trend with αp content increasing at a certain αl content of 28%. However, they decrease first and then increase with αl content increasing at a certain αp content of 20%. The early plasticity decrease at lower αl content is due to the popular rapid void nucleation and cleavage fracture along αl/βt interfaces. When αp or αl content increases to higher level, the deformation compatibility and homogeneity improves, which suppress the rapid void nucleation and cleavage fracture along αl/βt interfaces. Meanwhile, the fracture mechanism changes from the coexistence of void coalescence and cleavage fracture to the void coalescence dominated fracture, thus the plasticity increases. Moreover, a back-propagation neural network model was developed to correlate the mechanical properties with microstructural parameters of tri-modal microstructure. The prediction results suggest that better combination of strength and plasticity can be achieved by controlling the contents of αp and αl in the range of 10–15% and 22–27%, respectively.

Model for Predicting Microstructure of TA15 Titanium Alloy in Near Β Forging Based on Improved BP Neural Network

Prediction and Control of Equiaxed Α in Near-Β Forging of TA15 Ti-alloy Based on BP Neural Network: for Purpose of Tri-Modal Microstructure

Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation

Prediction of Processing-Properties of TA15 Titanium Alloy Based on BP Neural Network

Prediction of Processing-Microstructure of TA15 Titanium Alloy Using Artificial Neural Network

Prediction of correlation between microstructure and tensile properties in titanium alloys based on BP artificial neural network

Allowable Ranges of Conventional Forging Parameters Determination for TA15 Ti-Alloy to Obtain Tri-modal Microstructure under Given Subsequent Heat Treatment

Dependence of Mechanical Properties on the Microstructural Parameters of TA15 Titanium Alloy with Tri-Modal Microstructure

Artifical Neural Metwork Model for the Prediction of Mechanical Properties of Ti-10v-2fe-3al Titanium Alloy

An ATPSO-BP Neural Network Modeling and Its Application in Mechanical Property Prediction

Model Prediction Of Processing-Property Of Tc11 Titanium Alloy Using Artificial Neural Network

Modeling the Correlation Between Microstructure and the Properties of the Ti–6Al–4V Alloy Based on an Artificial Neural Network

Microstructure-Tensile Properties Correlation for the Ti-6al-4v Titanium Alloy

A WOA-BP neural network microstructure evolution prediction model of TC11 titanium alloy and application in hollow shaft during cross wedge rolling with mandrel

ANN Model for Prediction of Dynamic Globularization in TC17 Titanium Alloy

Tri-modal Microstructure and Performance of TA15 Ti-alloy under Near-Β Forging and Given Subsequent Solution and Aging Treatment

Prediction of the mechanical properties of forged TC11 titanium alloy by ANN

Modeling for Grain Size of Stainless Steel by Forging Recrystallization Based on BP Neural Network

Modelling of the Hot Flow Behaviors for Ti-13Nb-13Zr Alloy by BP-ANN Model and Its Application

Deformation Intelligent Prediction of Titanium Alloy Plate Forming Based on BP Neural Network and Sparrow Search Algorithm

Modelling Optimisation of Hot Processing Parameters of Ti–6Al–4V Alloy Using Artificial Neural Network and Genetic Algorithm