Abstract:Revealing the microstructural parameters-mechanical properties relationship is very critical for the microstructure tailoring and properties optimization of titanium alloy. In this work, the dependence of mechanical properties on microstructural parameters of TA15 titanium alloy with tri-modal microstructure was investigated. The results indicate that at a certain lamellar α (αl) content (28%), both of yield strength (σ0.2) and ultimate tensile strength (σb) decrease continuously with the increase of equiaxed α (αp) content, while the decrease speed slows down at higher αp content. At a certain content of αp of 20%, σ0.2 and σb both increase first and then decrease as the content of αl increases. The above effect laws result from the competition between the softening effect caused by increasing the softer αp and αl contents and the strengthening effect relating to αl/βt interfaces and βt hardening. As for the elongation (δ) and reduction of area (Φ), they show an increase trend with αp content increasing at a certain αl content of 28%. However, they decrease first and then increase with αl content increasing at a certain αp content of 20%. The early plasticity decrease at lower αl content is due to the popular rapid void nucleation and cleavage fracture along αl/βt interfaces. When αp or αl content increases to higher level, the deformation compatibility and homogeneity improves, which suppress the rapid void nucleation and cleavage fracture along αl/βt interfaces. Meanwhile, the fracture mechanism changes from the coexistence of void coalescence and cleavage fracture to the void coalescence dominated fracture, thus the plasticity increases. Moreover, a back-propagation neural network model was developed to correlate the mechanical properties with microstructural parameters of tri-modal microstructure. The prediction results suggest that better combination of strength and plasticity can be achieved by controlling the contents of αp and αl in the range of 10–15% and 22–27%, respectively.

Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation

A numerical model based on internal-state-variable method for the microstructure evolution during hot-working process of TA15 titanium alloy

Model for Predicting Microstructure of TA15 Titanium Alloy in Near Β Forging Based on Improved BP Neural Network

Microstructure and Damage Based Constitutive Modelling of Hot Deformation of Titanium Alloys

Microstructure Evolution and Numerical Simulation of TA15 Titanium Alloy During Hot Compressive Deformation

Prediction and Control of Equiaxed Α in Near-Β Forging of TA15 Ti-alloy Based on BP Neural Network: for Purpose of Tri-Modal Microstructure

Prediction of Processing-Microstructure of TA15 Titanium Alloy Using Artificial Neural Network

Prediction of Processing-Properties of TA15 Titanium Alloy Based on BP Neural Network

Prediction of Constitutive Behavior and Microstructure Evolution in Hot Deformation of TA15 Titanium Alloy

Dependence of Mechanical Properties on the Microstructural Parameters of TA15 Titanium Alloy with Tri-Modal Microstructure

A set of models for microstructure evolution of titanium alloy during high temperature deformation

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

Hot Deformation Behavior and Microstructure Evolution of TA15 Titanium Alloy with Nonuniform Microstructure

Research on microstructure evolution in preforming of large complex integral component of TA15 titanium alloy

Microstructure evolution model based on deformation mechanism of titanium alloy in hot forming

Establishment of TA15 titanium alloy constitutive model based on stepwise regression method

Metal Behavior of Hot Extrusion Deformation and Microstructural Analysis of TA15 Titanium Alloy

Deformation Behavior and Microstructure Evolution of TA15 Titanium Alloy after Isothermal near beta Deformation

Allowable Ranges of Conventional Forging Parameters Determination for TA15 Ti-Alloy to Obtain Tri-modal Microstructure under Given Subsequent Heat Treatment

INFLUENCE AND PREDICTION OF HEAT FORMING PARAMETERS ON THE MICROSTRUCTURE OF Ti-15-3 ALLOY

Tri-modal Microstructure Evolution of TA15 Ti-alloy under Conventional Forging Combined with Given Subsequent Heat Treatment