Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Modeling for Grain Size of Stainless Steel by Forging Recrystallization Based on BP Neural Network

The research on measuring analysis and prediction of the nanoscale precipitated phase in steel

Prediction of grain size in TB18 titanium alloy forgings by re-crystallization and grain growth modelling

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Prediction on Hot Deformation Flow Stress of Medium-carbon Micro-alloyed Steels with Vanadium Based on Artificial Neural Network

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Prediction of Recrystallization Structure of 2A12 Aluminum Alloy Pipe Extrusion Process Based on BP Neural Network

Prediction of the flow stress of high-speed steel during hot deformation using a BP artificial neural network

An Adaptive Prediction Model Of Grain Size For The Forging Of Ti-6al-4v Alloy Based On Fuzzy Neural Networks

Modelling of Dynamic Recrystallization in Hot Working

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process

[Are tick medications pesticides? Implications for health and risk perception for workers in the dairy cattle sector].

Construction of the Recrystallization Model of Low Carbon Steel During Deformation

Research on constitutive model of aluminum alloy 7075 thermal deformation based on deep neural network

INFLUENCE AND PREDICTION OF HEAT FORMING PARAMETERS ON THE MICROSTRUCTURE OF Ti-15-3 ALLOY

Modeling flow stress and grain size of GCr15 bearing steel at high-temperature deformation near end of solidification

Modeling of Flow Stress of As-Rolled 7075 Aluminum Alloy during Hot Deformation by Artificial Neural Network and Application

Machine Learning Hot Deformation Behavior of Nb Micro-alloyed Steels and Its Extrapolation to Dynamic Recrystallization Kinetics

Modeling of the hot-deformation behavior of Fe-Ni-Al maraging steel using constitutive equations and machine learning algorithms

Machine learning neural-network identification for dynamic recrystallization grains during hot deformation of nickel-based superalloy