Abstract:For cross-ply laminates micro-matrix cracks in the 90 degrees plies and inelastic deformation in the 0 degrees and 90 degrees plies are two major forms of damage which affect the long-term durability of the materials. It is crucial to develop a mechanics based approach to incorporate both micro-cracks and inelastic deformation of the composite materials based on the response of the 0 degrees and 90 degrees plies in order to accurately predict the response of the materials in service environments and to assist in optimizing the materials system for best performance. However, such a task leads to severe mathematical difficulties, primarily due to the zero traction conditions on the crack surfaces, the complicated constitutive relations governing the inelastic deformation and the interaction between the cracks and the inelastic deformation. In this paper, a general framework for the analysis of cross-ply laminates with micro-matric cracks and inelastic deformation is proposed. For this purpose admissible stress fields are constructed which satisfy equilibrium and all boundary and interface conditions. The principle. of minimum complementary energy is utilized to derive a differential equation for the stress function from which the stress field of the composite can be derived. The inhomogeneous terms of the differential equation involve the inelastic strains which are loading history dependent. The Green's function of the differential equation is then obtained. Using the Green's function and a constitutive equation, two-dimensional stress and strain states in the composite at any time are represented by an integral of the Green's function and the inelastic strains. accumulated up to that time. This new analysis takes into consideration the microcrack-microcrack interaction, as well as the interaction between the microcracks and the inelastic deformation, and provides a point-wise variation of the stress field instead of average stress field as most of the analytical approaches yield.The interactions of matrix cracks and creep deformation of an eight-harness satin weave (8HSW) Nextel 610/Aluminosilicate ceramic matrix composite is studied using the proposed model. The predicted creep Strain of the composite shows good correlation with experimental data at different levels of temperature and stress conditions. The distribution of stresses and strains provides important information on the response of the composite. (C) 1997 Elsevier Science Ltd.

Statistical modeling for the accumulation of transverse matrix cracking in cross-ply laminates

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Analysis of Stochastic Matrix Crack Evolution in CFRP Cross-Ply Laminates under Fatigue Loading

Transverse crack evolution modeling of cross-ply laminates with a single layer of phantom node intraply elements for identically-oriented ply groups

Statistical Analysis of the Progressive Failure Behavior for Fiber-Reinforced Polymer Composites under Tensile Loading

A Simplified Computational Strategy Focused on Resin Damage to Study Matrix Cracking of the Cross-Ply Laminates under Uniaxial Tension Load

A Variational Approach to Analyzing Laminates with Cracks and Viscoplasticity - the Model and Its Validation

On Inter-Relationships of Elastic Moduli and Strains in Crossply Laminated Composites

Micro-mechanical Analysis of Matrix Crack-Induced Delamination in Cross-Ply Laminates in Tension

Investigation into the Multiple Transverse Cracks in Cross-ply Laminates

A damage model for matrix cracks in composite laminates under fatigue loading based on continuum damage mechanics

Predictive Approach to Failure of Composite Laminates with Equivalent Constraint Model

Modelling Of Multilayer Ply Cracking In Composite Laminates Under Cyclic Loading

On the Analysis of Cross-Ply Laminates with Micro-Cracks and Inelastic Deformation

Fracture Analysis of Composite Laminates under Tensile Loading Using Monte-Carlo Simulation

A Micro-Mechanical Constitutive Model for Cracked Plies of Laminated Composites Considering the Constraint Effect of the Adjacent Plies

Prediction of Matrix-Cracking-induced Stiffness Degradation of Cross-Ply Laminates Based on Data-Driven Method

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Initiation and propagation of transverse cracking in composite laminates

A study of transverse ply cracking using a discrete element method

Prediction of Microcracking Distributions in Composite Laminates Using a Monte-Carlo Simulation Method