Abstract:Melt-branching of high density polyethylene (HDPE), through free radical reaction, was carried out in the presence of dicumyl peroxide (DCP) as the initiator, neopentyl glycol diacrylate (NPGDA) as difunctional monomer, and zinc dimethyldithiocarbamate (ZDMC) as the free radical concentration regulator. Results showed that HDPE with long branching chains and low gel content was obtained under optimized reaction time, which was corresponding to the reaction peak-the second peak in the torque curve. After this melt branching reaction, the molecular weight of the modified HDPE increased slightly and its molecular weight distribution became wider compared with the virgin linear HDPE. The branching degree of modified HDPE increased with increased monomer content, with a more apparent shear thinning in the complex viscosity versus frequency (eta*-omega) plots. The regularity of the polyethylene molecule was broken up after the long branching chains being introduced, which decreased the degree of crystallinity in the modified polyethylene. While the crystallization onset temperature improved and the size of spherocrystal obviously decreased with the nucleation of the long branching chains in the modified HDPE, a threshold value for the branching was shown to exist by the environmental stress cracking resistance test on the modified polyethylene. When monomer content exceeded 0.6 phr, the molecule shape of the long chain branched polyethylene transformed from asymmetric star-like to comb-like, which made the environmental stress cracking resistance time be larger than 1000 h, the strength, the modulus and the impact toughness were all enhanced at the same time. However, the branching degree was reduced with an overlong time mixing and melt-branching reaction, the comb-like branching chains were not formed by consequence, which made an inapparent enhancement for the environmental stress cracking resistance performance of the modified polyethylene.

The Effect of Using the Two-Step Extrusion Method on the Oxidation Induction Time Value of Recycled High Density Polyethylene

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Influence of Wall Number and Surface Functionalization of Carbon Nanotubes on Their Antioxidant Behavior in High Density Polyethylene

Oxidization and Chain‐Branching Reaction for Recycling HDPE and Mixed HDPE/PP with In‐situ Compatibilization by Ozone‐Induced Reactive Extrusion

Influence of Binary Combined Systems of Antioxidants on the Stabilization of Peroxide‐cured Low‐density Polyethylene

Effect of thermal-oxidative and mechanical degradation of recycled LDPE on foaming

Melt Branching of High Density Polyethylene and Influences on Its Performances

Towards high-performance all-polyethylene materials by a two-step processing strategy using two-roll mill

Effects of thermo-oxidative aging on chain mobility, phase composition, and mechanical behavior of high-density polyethylene

The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

Upcycling of recycled polyethylene for rotomolding applications via dicumyl peroxide crosslinking

Ozone-based in-situ reactive extrusion for rapid functionalisation and degradation of low density polyethylene

Effect of Additives on Thermal Degradation and Crack Propagation Properties of Recycled Polyethylene Blends

Influence of different antioxidants on cure kinetics and aging behaviours of ethylene propylene diene rubber/low density polyethylene blends

The effect of carbon black on degradation of pipe grade black polyethylene in high concentration chlorine dioxide solutions

Thermal characteristics and temperature profile changes of structurally different polyethylenes with peroxide modifications

Correlation Between Oxidation-induced Crosslinking and Rheological Behavior of HDPE

Rheological Insights into the Degradation Behavior of PP/HDPE Blends

Effect of isoindole derivative pigments with planar macroconjugated structure on the UV resistance of HDPE

Optimizing high-density polyethylene (HDPE) performance: utilizing diatomaceous earth filler and an innovative reversible crosslinking reaction agent (RXR)

Study of Factors Affecting UV-Induced Photo-Degradation in Different Types of Polyethylene Sheets