Abstract:The effect of rolling temperature on the incomplete recrystallization behavior and the relationship to mechanical properties in 0.06C–4Mn-1.2Cr (wt.%) steel was investigated. Three plates of experimental steel were produced by hot rolling at different temperatures and intercritical annealing processes in this study. The microstructure of experimental steels was examined by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscope (TEM). The mechanical properties of test steel were examined by impact test and tensile test. Austenite reversion and cementite precipitation-dissolution was numerically simulated under the assumption of local equilibrium. With the decrease of hot rolling temperature from 1000 °C to 800 °C, the uniform equiaxed prior austenite grains microstructures changed to heterogeneous microstructures of laminated and ultrafine prior austenite grains arranged alternatively. The tensile and impact tests revealed that the medium manganese steels rolling at 800 °C had an excellent combination of mechanical properties. Elongation had a great relationship with retained austenite fraction and stability. The fractography of impact specimens was examined to explore the toughening mechanism of the micro-laminated steels. The steel with uniform equiaxed grain structure exhibited a relatively low tensile strength of 750 MPa and low elongation of ∼20% and an extremely poor low-temperature toughness of ∼40 J at −40 °C. An enhanced low-temperature toughness (∼233 J at −40 °C), as well as an improved tensile strength (823 MPa) and higher elongation of ∼40%, was obtained in the steel with heterogeneous microstructures. The content of austenite in heterogeneous microstructure is twice that in uniform equiaxed grain structure. And cementite dissolved more thoroughly in the heterogeneous microstructure. The high austenite content of heterogeneous microstructures enabled the steel to be significantly stronger and ductile, which contributed to the high tensile strength and elongation to some extent. It is concluded that the effect of interface decohesion resulted in the occurrence of delamination. And the high austenite content and delamination greatly improved the low-temperature toughness of experimental steel.

Microstructure and properties of hot stamping 22MnB5 steel

Effect of Deformation on Microstructure and Properties of Hot Stamping Boron Steel B1500HS

Study on the Effect of the Pre-Forming of 22MnB5 Steel in Indirect Hot Stamping

Effect of Different Quenching Methods on the Microstructure and Mechanical Properties of 30MnB5NbTi

Exploration of hot stamping heating parameters and mechanical properties for 38MnB5 hot-rolled steel plate

Warm Stamping Technology of the Medium Manganese Steel

Research on Hot Stamping-Carbon Partition-Intercritical Annealing Process of Medium Manganese Steel

A Hot‐Stamped Medium‐Mn Steel with Superior Strength–Ductility–Bendability Combination and Thin Oxidation Layer

Microstructural Evolution in Boron-Added Advanced High-Strength Steel Suitable for Hot Stamping

Investigation into the Hot-Forming Limit for 22MnB5 Hot-Forming Steel under a Stamping Process

The Effects of Die Temperature and Cooling Condition on Friction Behavior of Bare 22MnB5 Boron Steel in Hot Stamping

Evolution of Microstructures and Mechanical Properties of Nb-V Alloyed Ultra-High Strength Hot Stamping Steel in Austenitizing Process

Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel

High Temperature Oxidation Resistance and Mechanical Properties of Uncoated Ultrahigh-Strength Steel 22MnB5

Effects of soaking temperature on the microstructure and mechanical properties of a medium Mn steel for hot/warm forming

Effect of rolling temperature on microstructure and mechanical properties of medium manganese steel

Microstructure Regulation and Mechanical Properties of Low-Carbon Multiphase Steels

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Study on the Effect of Heat Treatment on Microstructures and High Temperature Mechanical Properties of Welding Spots of Hot Stamped Ultra-High Strength Steel Patchwork Blanks

Enhanced Yield Strength and Total Elongation of an Ultrahigh Strength Hot‐Stamped Steel via Tempering Treatment

Characterization of Mechanical Properties, Macroscopic Deformation Behavior, and Microstructure of Functionally Graded 22MnB5 Steel