Abstract:OBJECTIVE:To explore the effect of changes of processing time on the surface properties of titanium coating formed by micro-arc oxidation (MAO).METHODS:Forty-four disc-shaped pure titanium specimens with 10 mm diameter and 1 mm thickness were equally divided into 4 groups and processed by MAO technique in electrolytes containing 0.2 mol/L calcium acetate (CA) and 0.02 mol/L β-glycerol phosphate disodium salt pentahydrate (β-GP). The processing time were set at 1 min, 5 min, 10 min and 15 min respectively. The topograph of the MAO film surface and the film-substrate interface was observed by a scanning electron microscopy (SEM), and the composition was analyzed by an energy dispersive spectroscope (EDS) incorporated in the SEM. The phase and the microstructure of the film were analyzed by X-ray diffraction (XRD). The roughness of the film was measured using a roughness tester. The surface static contact angle was detected by a contact angle measurement instrument and the surface energy was calculated accordingly.RESULTS:With the increase of processing time from 1 min to 15 min, the pore size increased from (1.30 ± 0.07) µm to (1.55 ± 0.09) µm, and film thickness increased from (10.2 ± 1.1) µm to (20.9 ± 2.9) µm. The content of the Ca in the film increased accordingly, and Ca/P increased from 1.99 to 2.45, and the surface energy increased from 24.62 mJ/m(2) to 39.49 mJ/m(2). Meanwhile, the XRD pattern indicated that rutile increased but anatase and titanium decreased gradually. At the time of 15 min, part of the MAO film peeled off.CONCLUSIONS:Processing time has impact on the thickness, surface topography, crystal component and surface energy of titanium MAO coating. MAO film treated for 5 - 10 min demonstrated favorable surface properties.

Effects of the Grain Boundary on Phase Structure and Surface Morphology of Tio2 Films Prepared by Mao Technology

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Controllable Hydrothermal Synthesis, Optical and Photocatalytic Properties of TiO2 Nanostructures

Crystallization Behaviors of TiO2 Films Derived from Thermal Oxidation of Evaporated and Sputtered Titanium Films

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Preparation of Macroporous and Mesoporous Tio2 Film with Various Solvents

Structural Characteristics of BaTiO3 Films Prepared by Microarc Oxidation

Influence of Substrate on Structural, Morphological and Optical Properties of TiO2 Thin Films Deposited by Reaction Magnetron Sputtering

TiO2 films prepared by DC reactive magnetron sputtering at room temperature: Phase control and photocatalytic properties

Porous Films on Surface of Titanium Prepared by Low Voltage Micro Arc Oxidation

Synthesis of Tetragonal BaTiO3 Film on Ti Substrate by Micro-Arc Oxidation

Preparation and microstructure of thin TiO2 films containing Ca and P using micro-arc oxidation

PREPARATION AND MICROSTRUCTURE OF THIN <font>TiO</font><sub>2</sub> FILMS CONTAINING <font>Ca</font> AND <font>P</font> USING MICRO-ARC OXIDATION

Effects of Technological Parameters on Growth of BaTiO_3 and SrTiO_3 Film Prepared by Microarc Oxidation

Study on the Microstructural Evolution of Batio3 on Titanium Substrate During Mao

Compositional and Structural Evolution of the Titanium Dioxide Formation by Thermal Oxidation

[Effect of Processing Time on the Surface Properties of Titanium Micro-Arc Oxidation Film].

Micro Arc Oxidation of S-containing TiO2 Films by Sulfur Bearing Electrolytes

Growth Characteristics of BaxSr(1−x)TiO3 Thin Films Produced by Micro-Arc Oxidation

Research on Growth Process and Microstructure of Microarc Oxidation Coating on Titanium

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films