Abstract:Aluminium alloy strengthened with the ceramic particle is widely utilized for numerous engineering usages owing to its less weight, and superior mechanical and tribological behavior. The purpose of this research is to manufacture AA6063-Nano AlN composites via stir casting (SC) process and to examine the mechanical, tribological, electrical, and thermal and CNC drilling behavior. Nano AlN was mixed with AA6063 at 4, 8, and 12 wt.%. The occurrence and dispersal of Nano AlN particles in AA6063 matrix were inspected via Scanning Electron Microscope (SEM). The density and porosity were explored. The mechanical studies on microhardness, tensile strength and yield strength, flexural strength, and compressive strength have been done. SEM fractographic examination was made on the tensile fracture samples. The thermal conductivity, electrical resistivity and electrical conductivity, and salt spray corrosion analysis were made on the produced composites. The tribological behavior of the composites was studied using numerous parameters, reinforcement wt.%, load (L), sliding velocity (SV), and sliding distance (SD). The worn surface examination was done via SEM. The CNC drilling behavior was done at different parameter speed (S), feed (F), and depth of cut (DOC). Experiments were carried out according to the L9 orthogonal array (OA). Optimal process parameter to attain higher material removal rate (MRR) and least surface roughness (SR) was identified via Grey Relational Analysis (GRA). ANOVA outcomes revealed that feed rate is the foremost noteworthy parameter (45.89%) influencing MRR and SR.

Processing, Microstructure and Tensile Properties of Nano-Sized Al2O3 Particle Reinforced Aluminum Matrix Composites

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Fabrication, Microstructure Refinement and Strengthening Mechanisms of Nanosized SiCP/Al Composites Assisted Ultrasonic Vibration

Nano-SiCP Particles Distribution and Mechanical Properties of Al-matrix Composites Prepared by Stir Casting and Ultrasonic Treatment

Microstructure and Mechanical Properties of In-Situ Nano Γ-Al2o3p/a356 Aluminum Matrix Composite

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Semi-Solid Processing of Nano-SiCP/ Al-Si Composites and Mechanical Properties with Rheo-Casting

Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles

Microstructures and Mechanical Properties of In-Situ Al 3 Ti/2024 Aluminum Matrix Composites Fabricated by Ultrasonic Treatment and Subsequent Squeeze Casting

Processing and mechanical properties of fine grained Al matrix composites reinforced with a uniform dispersion of nanocrystalline high-entropy alloy particles

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Effect of Nanoaluminium Nitride Ceramic Particles on Microstructure, Mechanical Wear, and Machining Behavior of Al-Si-Mg Alloy Matrix Composites Produced by Bottom Pouring Type Stir Casting Route

Tensile deformation behavior of a sub-micrometer Al2O3/6061Al composite

Mechanical Behavior of Ultrafine-Grained Al Composites Reinforced with B4C Nanoparticles

Effect of Initial Ti Powders Size on the Microstructures and Mechanical Properties of Al3Ti/2024 Al Composites Prepared by Ultrasonic Assisted In-Situ Casting

Enhancing the Microstructure and Mechanical Properties of Cast Aluminum Matrix Composites Through Nano-Al2O3 Reinforcement via CMT and PMC Welding