Abstract:Since the 1960s, it has been a common practice worldwide to pursue a homogeneous distribution of reinforcements within a matrix material, discontinuous metal matrix composites (DMMCs) in particular. Taking an overview of the worldwide activities in DMMC research, despite many favourable attributes such as improved specific strength, stiffness and superior wear resistance, DMMCs with a homogeneous microstructure tend to exhibit a very low room temperature damage tolerance even with a highly ductile matrix material such as aluminium. In this review, a range of uniquely multi-scale hierarchical structures have been successfully designed and fabricated by tailoring reinforcement distribution for DMMCs in order to obtain superior performance. A variety of specific microstructures that were developed in Al, Mg, Cu, Fe, Co and TiAl matrices indicate that there must be adequate plastic regions among the reinforcements to blunt or deflect cracks if one wants to toughen DMMCs. Following this path, aided by theoretical analyses, the most recent success is the design and fabrication of a network distribution of in situ reinforcing TiB whiskers (TiBw) in titanium matrix composites (TMCs), where a tailored three-dimensional (3D) quasi-continuous network microstructure displays significant improvements in mechanical properties. This resolves the brittleness surrounding TMCs fabricated by powder metallurgy. It is the large reinforcement-lean regions that remarkably improve the composite’s ductility by bearing strain, blunting the crack and decreasing the crack-propagation rate. The fracture, strengthening and toughening mechanisms are comprehensively elucidated in order to further understand the advantages of such an inhomogeneous microstructure, and to justify the development of novel techniques to produce such inhomogeneous microstructures. This approach opens up a new horizon of research and applications of DMMCs and can be easily extended to general multi-phase composites with enhanced physical and mechanical properties.

Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano-Sized Particles

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review

Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review

A Review on Distribution of Reinforcement and tensile Strength of Aluminum Lithium Alloy based Nano Metal Matrix Composites Fabricated by STIR Casting

Nano-additive manufacturing of multilevel strengthened aluminum matrix composites

Metal Matrix Composites Reinforced by Nano-Particles—A Review

A review of aluminum metal matrix composites: fabrication route, reinforcements, microstructural, mechanical, and corrosion properties

Aluminum matrix composites: Structural design and microstructure evolution in the deformation process

Review: recent progress in aluminum matrix composites reinforced by in situ oxide ceramics

Microstructure and mechanical properties of Al–Si–Cu–Fe alloy-based ceramic particle-reinforced nanocomposites and microcomposites and a modified model to predict the yield strength of nanocomposites

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Recent progress in particulate reinforced aluminum composites fabricated via spark plasma sintering: Microstructure and properties

Research Progress on Nanoparticles Reinforced Magnesium Alloys

Production methods of ceramic-reinforced Al-Li matrix composites: A review

Evading Ductility Deterioration in Aluminum Matrix Composites Via Intragranulation of Nano-Reinforcement by Reactive Selective Laser Melting

An Atomic-Level Understanding of the Strengthening Mechanism of Aluminum Matrix Composites Reinforced by Aligned Carbon Nanotubes

Effect of Reinforcement Types on the Ball Milling Behavior and Mechanical Properties of 2024al Matrix Composites

Graphene-Reinforced Aluminum Matrix Nanocomposites: Structure and Properties