Abstract:Introducing aligned pores into lead‐free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics enhances the d33 piezoelectric coefficient by 22–41% compared to its dense counterpart, significantly improving the voltage coefficient (g33), energy harvesting figure of merit (FoM33) and electromechanical coupling coefficient (k332 ). The findings provide insights into the role of porosity on the properties of ferroelectric ceramics for applications related to sensing, harvesting, and actuating devices. The introduction of porosity into ferroelectric ceramics can decrease the effective permittivity, thereby enhancing the open circuit voltage and electrical energy generated by the direct piezoelectric effect. However, the decrease in the longitudinal piezoelectric coefficient (d33) with increasing porosity levels currently limiting the range of pore fractions that can be employed. By introducing aligned lamellar pores into (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3, this paper demonstrates an unusual 22–41% enhancement in the d33 compared to its dense counterpart. This unique combination of high d33 and a low permittivity leads to a significantly improved voltage coefficient (g33), energy harvesting figure of merit (FoM33) and electromechanical coupling coefficient (k332 ). The underlying mechanism for the improved properties is demonstrated to be a synergy between the low defect concentration and high internal polarizing field within the porous lamellar structure. This work provides insights into the design of porous ferroelectrics for applications related to sensors, energy harvesters, and actuators.

Formation Mechanism of Intragranular Pores in Pb(Zr0.95ti0.05)O3 Ferroelectric Ceramic

Enhanced Ferroelectric Properties of Intragranular-Porous Pb(Zr0.95ti0.05)O-3 Ceramic Fabricated with Carbon Nanotubes

Nanopore-induced Dielectric and Piezoelectric Enhancement in PbTiO3 Nanowires

Microgeometry Effect on the Properties of Pb-0.99(Zr0.95ti0.05)(0.98)Nb0.02o3 Ferroelectric Ceramics

Quantitative Dependence of the Properties of Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 Ferroelectric Ceramics on Porosity

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

Phase diagram and properties of high TC/TR-T Pb (In 1/2 Nb1/2) O3- Pb(Zn1/3 Nb 2/3) O3-PbTiO3 ferroelectric ceramics

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Tailored Phase Transition and Electric Properties of Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 Ferroelectric Ceramics by ZnO Modification

Sintering and Electrical Properties of Tungsten Doped Pb(Zr0.95Ti0.05)O3 Ferroelectric Ceramics

Effect of TiO<sub>2</sub> Nanopowders on the Sintering and Electric Properties of Lead Zirconate Titanate Ceramics

Synthesis, formation and characterization of ZnTiO3 ceramics

Effects of Sintering Temperature and Holding Time on the Microstructure and Electric Properties of Ba(Zr0.3Ti0.7)O3 Ceramics

Porous Structure Enhances the Longitudinal Piezoelectric Coefficient and Electromechanical Coupling Coefficient of Lead‐Free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3

Fabrication and Characterization of Bilayered Pb(Zr,Ti)O3-based Ceramics

Tailored Electrical Properties with Enhanced Fracture Toughness in Pb-0.99(Zr0.95ti0.05)(0.98)Nb0.02o3 Ferroelectric Ceramics

Internal friction study of Pb(Zr,Ti)O3 ceramics with various Zr/Ti ratios and dopants

Low-temperature sintering and electric properties of Pb0.99(Zr 0.95Ti0.05)0.98Nb0.02O3 ferroelectric ceramics with CuO additive

Structure, Phase Transition Behavior, and Electrical Properties of Pb0.99(Sn Zr0.95−Ti0.05)0.98Nb0.02O3 Ceramics

Microstructure and Electrical Properties of PLZT Ceramics from Pb3O4 As the Lead Source

Effect of MgO addition on sintering temperature, crystal structure, dielectric and ferroelectric properties of lead-free BZT ceramics