Abstract:The deformation characteristics of a single crystal nickel-based alloy containing Re during the creep at room temperature were studied by means of the creep property test, microstructure observation and the contrast analysis of dislocation configuration. The results show that during the deformation of the alloy at room temperature, the original cubic γ′ phase transforms into a rhombous shape along the direction of maximum shearing stress, and its deformation feature is that the dislocation slips in the matrix and shear the γ′ phase. The superdislocation shear into the γ′ phase can cross slip from the {111} plane to the {100} plane, forming K-W lock, and can also be decomposed at the {111} plane. The dislocation configurations of (1/2) partial dislocation plus antiphase boundary (APB) and (1/3) partial dislocation plus SISF can effectively inhibit the slip and cross-slip of the dislocation and improve the deformation resistance of the alloy. At the later stage of creep, under the action of shear stress, the initial slip system is activated first to distort the two phases of γ/γ′, and then the secondary slip system is activated and shear the primary slip system, resulting in a large stress concentration at the delivery point and the initiation of cracks in this area. With the alternating activation of the primary slip system and secondary slip system during creep, the initiation and expansion of cracks continue. It is the damage and fracture mechanism of alloy during room temperature creep.

Room Temperature Nanoindentation Creep of Nanocrystalline Cu and Cu Alloys

Nanoindentation Creep Behavior of an Al 0.3 CoCrFeNi High-Entropy Alloy

Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy

Nanoindentation Creep Behavior and Its Relation to Activation Volume and Strain Rate Sensitivity of Nanocrystalline Cu

Nanoindentation Creep of Ultrafine-Grained Al2o3 Particle Reinforced Copper Composites

The Influence Of Time, Temperature, And Grain Size On Indentation Creep In High-Purity Nanocrystalline And Ultrafine Grain Copper

Creep behaviors of nanocrystalline copper after stress reduction under nanoindentation at ambient temperature

Study of Crystallographic Creep Parameters of Nickel-Based Single Crystal Superalloys by Indentation Method

Room Temperature Nanoindentation Creep of Nanoscale Ag/Fe Multilayers

Measurement of Creep Stress Exponent of TC17 Titanium Alloy by Nanoindentation Method at Room Temperature

Dislocation-mediated Creep Process in Nanocrystalline Cu

An Investigation of Nanoindentation Creep in Polycrystalline Cu Thin Film

Dependence of strain rate sensitivity upon deformed microstructures in nanocrystalline Cu

Room temperature creep behavior of a single crystal nickel-based alloys

High-Speed Creep Process Mediated by Rapid Dislocation Absorption in Nanocrystalline Cu

Nanoindentation Characterized Initial Creep Behavior of a High-Entropy-based Alloy CoFeNi

Indentation Size Dependent Plastic Deformation of Nanocrystalline and Ultrafine Grain Cu Films at Nanoscale

The mechanisms of nanoindentation creep in Al thin metal films

Indenter Load Effects on Creep Deformation Behavior for Ti-10V-2Fe-3Al Alloy at Room Temperature

Room temperature nanoindentation creep behavior of CoNiCrMo-based high entropy amorphous alloy coatings prepared by HVAF

Effects of Loading Strain Rate and Stacking Fault Energy on Nanoindentation Creep Behaviors of Nanocrystalline Cu, Ni-20 Wt.%fe and Ni