Abstract:This Article focuses on the fabrication of highly ordered nanotubes and some novel nanostructures of titania (TiO2) with a two-step anodization method. The first-step anodization was actually a pretreatment of the Ti foil surface and provided well-ordered imprints that served as a template for the further growth of nanotubes. As a result, the TiO2 nanotubes growing in the second-step anodization appreciably outperformed those fabricated with the conventional one-step Ti anodization in terms of size uniformity and arrangement orderliness. The parameters of the anodization were then modulated to obtain more complex structures. When the voltage in the second-step anodization was lower than that in the first-step anodization, a lotus root-shaped TiO2 nanostructure, in which each imprint contained several smaller nanopores, was achieved. When the second anodization was further divided into two stages, double-layered nanotube arrays were synthesized. They contained two distinctly separated parts, i.e., the bamboo-shaped upper one and the smooth-walled lower one. These results have demonstrated the effectiveness and controllability of the two-step anodization method in producing high-quality TiO2 nanotubes, which are believed to have potential applications in such fields as solar cells, photonic crystals, and hydrogen storage.

Synthesis of High‐aspect‐ratio, Top‐open and Ultraflat‐surface TiO2 Nanotubes Through Double‐layered Configuration

Fabrication of Well-Aligned Tio2 Nanotube Arrays with Outstanding Light-Induced Hydrophilicity Performance

A Two-Step Anodization to Grow High-Aspect-Ratio Tio2 Nanotubes

Anodization Fabrication of Highly Ordered Tio2 Nanotubes

One-step Realization of Open-Ended TiO2 Nanotube Arrays by Transition of the Anodizing Voltage

Fabrication of Open-Ended Tio2 Nanotube Arrays by A Simple Two-Step Anodization

Facile Fabrication of Free-Standing TiO2 Nanotube Membranes with Both Ends Open Via Self-Detaching Anodization

Fabrication of multi-sectional TiO 2 nanotube arrays by anodization

Surface roughening and top opening of single crystalline TiO2 nanowires for enhanced photocatalytic activity

Influence Ofin SituOxide Dissolution on the Bottom Morphologies of Detached TiO2Nanotube Films

Fabrication of Double-Walled TiO2 Nanotubes with Bamboo Morphology Via One-Step Alternating Voltage Anodization

Structural Engineering of Highly Ordered TiO2 Nanotube Array by Periodic Anodization of Titanium

Synthesis of TiO<sub>2</sub> Nanotube Arrays Through Multistep Anodization

Tailoring the Surface Morphology of TiO2 Nanotube Arrays Connected with Nanowires by Anodization

Hierarchical Wall Formation of Titanium Oxide Nanotube Arrays Using Anodic Oxidation

A Facile Route to Synthesis of Double-Sided TiO2 Nanotube Arrays for Photocatalytic Activity

Fabrication of open-ended TiO2 nanotube arrays by anodizing a thermally evaporated Ti/Au bilayer film

TiO2 Nanotubes with Tunable Morphology, Diameter, and Length: Synthesis and Photo-Electrical/Catalytic Performance

Electrochemical Fabrication and Formation Mechanism of Tio2 Nanotube Arrays on Metallic Titanium Surface

Facile fabrication of open-ended high aspect-ratio anodic TiO 2 nanotube films and their applications

Open-Top Tio2 Nanotube Arrays With Enhanced Photovoltaic And Photochemical Performances Via A Micromechanical Cleavage Approach