Abstract:This Article focuses on the fabrication of highly ordered nanotubes and some novel nanostructures of titania (TiO2) with a two-step anodization method. The first-step anodization was actually a pretreatment of the Ti foil surface and provided well-ordered imprints that served as a template for the further growth of nanotubes. As a result, the TiO2 nanotubes growing in the second-step anodization appreciably outperformed those fabricated with the conventional one-step Ti anodization in terms of size uniformity and arrangement orderliness. The parameters of the anodization were then modulated to obtain more complex structures. When the voltage in the second-step anodization was lower than that in the first-step anodization, a lotus root-shaped TiO2 nanostructure, in which each imprint contained several smaller nanopores, was achieved. When the second anodization was further divided into two stages, double-layered nanotube arrays were synthesized. They contained two distinctly separated parts, i.e., the bamboo-shaped upper one and the smooth-walled lower one. These results have demonstrated the effectiveness and controllability of the two-step anodization method in producing high-quality TiO2 nanotubes, which are believed to have potential applications in such fields as solar cells, photonic crystals, and hydrogen storage.

Fabrication of Double-Walled TiO2 Nanotubes with Bamboo Morphology Via One-Step Alternating Voltage Anodization

Anodization Fabrication of Highly Ordered Tio2 Nanotubes

Anodic Formation of Aligned and Bamboo-Type Tio2 Nanotubes at Constant Low Voltages

Fabrication of multi-sectional TiO 2 nanotube arrays by anodization

Fabrication of Titanium Oxide Nanotube Arrays by Anodic Oxidation

Fabrication of TiO2 Nanotube Arrays by a Two-Step Anodic Oxidation

Fabrication And Fluorescence Property Of Titanium Dioxide Nanotube Arrays By Anodizing Processes

Fabrication of TiO 2 nanotubes with extended periodical morphology by alternating-current anodization

Anodic formation of ordered and bamboo-type TiO2 anotubes arrays with different electrolytes

Fabrication of Self-Branched TiO2 Nanotubes by Anodization Method, Ordering and Crystallinity

Tailoring the Surface Morphology of TiO2 Nanotube Arrays Connected with Nanowires by Anodization

Hierarchical Wall Formation of Titanium Oxide Nanotube Arrays Using Anodic Oxidation

Controllable Preparation of TiO2 Nanotube Arrays on Ti Foil Substrates

Fabrication of TiO<sub>2</sub> Nanotube Arrays in Ethylene Glycol Electrolyte by the Electrochemical Anodization Method

Electrochemical Fabrication and Formation Mechanism of Tio2 Nanotube Arrays on Metallic Titanium Surface

Fabrication of TiO2 Nanotube Arrays by Electrochemical Anodization in an NH4F/H3PO4 Electrolyte

Morphology of TiO_2 Nanotube Arrays Prepared by Anodic Oxidation

Preparation and Characterization of TiO<SUB>2</SUB> Nanotube Arrays by Anodic Oxidation Method: Preparation and Characterization of TiO<SUB>2</SUB> Nanotube Arrays by Anodic Oxidation Method

Synthesis of TiO<sub>2</sub> Nanotube Arrays Through Multistep Anodization

Preparation of Near Micrometer-Sized TiO2 Nanotube Arrays by High Voltage Anodization

Preparation of long TiO2 nanotubes with uniform morphology