Abstract:The plasticized starch exhibits flexible properties, similar to that of elastomer. In this paper, thermoplastic starch acetate (TPAS) and maleic anhydride grafted poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS‐MAH) were used to toughen polypropylene (PP) through melt blending. It is found TPAS and SEBS‐MAH have a synergistic toughening effect on PP, especially the notched impact strength of PP/TPAS/SEBS‐MAH (70/15/15) blend is as high as 83.4 kJ/m2, but only 7.2 kJ/m2 of that for PP/TPAS/SEBS (70/15/15) blend. The structure‐property relationship of the PP/TPAS/SEBS‐MAH blends was investigated. Compared with PP/TPAS/SEBS (70/15/15) blend, the TPAS domains are dispersed homogeneously in the PP/TPAS/SEBS‐MAH (70/15/15) blend with the domain size of TPAS less than 0.2 μm. The incorporation of SEBS‐MAH not only improves the compatibility between PP and TPAS but also facilitates the formation of a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell. Thus formed core‐shell particles play an important role in toughening PP. The spreading coefficient of the multiphase blend reveals that only when the SEBS‐MAH content is higher than TPAS, the core‐shell structure can be formed. Otherwise, TPAS and SEBS‐MAH will disperse separately and the toughness will not be improved. This work provides a new insight into polymer toughening with TPAS. In the case of PP/TPAS/SEBS blends, SEBS and TPAS dispersed separately. For PP/TPAS/SEBS‐MAH blends, the size of TPAS was lower than that of TPAS in the PP/TPAS/SEBS blends at a given content. It indicates the compatibility between PP and TPAS was improved significantly due to the presence of SEBS‐MAH. Only when the content of SEBS‐MAH is not less than TPAS, a core‐shell structure with TPAS as the core and SEBS‐MAH as the shell can be formed, which plays an important role in PP toughening.

Toughening of Polypropylene with Β-Nucleated Thermoplastic Vulcanizates Based on Polypropylene/ethylene–propylene–diene Rubber Blends

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Synergistic toughening effects of elastomer toughener and nucleating agent on mechanical properties and crystallization behaviors of polypropylene

Highly toughened PA6 using residue of plasticized PVB film via two-step reactive melt blending

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Toughening of Polyamide‐6 with Little Loss in Modulus by Block Copolymer Containing Poly(styrene‐alt‐maleic Acid) Segment

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Synergistic toughening of polypropylene by thermoplastic starch acetate and SEBS‐MAH

Toughening of Polypropylene by Combined Rubber System of Ultrafine Full-Vulcanized Powdered Rubber and SBS

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Epdm/Polyamide Tpv Compatibilized by Chlorinated Polyethylene

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Fabrication of robust polyamide 6 with local cross‐linked structure via dynamic vulcanization

Toughening Polypropylene with Nanoscale Rubber Particles

Unexpected Improvement of Both Mechanical Strength and Elasticity of EPDM/PP Thermoplastic Vulcanizates by Introducing β-Nucleating Agents

Polyamide-6/montmorillonite Nanocomposites Toughened with ABS-g-MA Core-Shell Structural Particles

High-Density Polyethylene-Based Ternary Blends Toughened by PA6/PBT Core–Shell Particles

Toughness enhancement of polyamide 6,12 with intermolecular hydrogen bonding with 3‐pentadecylphenol

Reactive Compatibilization and Elastomer Toughening of Poly(2,6-dimethyl-1,4-phenylene Oxide)/polyamide 6 Blends

Blends of Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Polyamide 6 Toughened by Maleated Polystyrene-Based Copolymers: Mechanical Properties, Morphology, and Rheology