Abstract:In order to remove perchlorate (ClO4-) from water via adsorption, three modified inorganic-bentonites, such as hydroxy-aluminum pillared bentonite (Al-Bent), hydroxy-iron pillared bentonite (Fe-Bent), and mixed hydroxy-iron–aluminum pillared bentonite (Fe–Al-Bent), were synthesized and characterized. Bench-scale batch experiments were performed to study mechanisms behind the adsorption phenomenon and explore the factors affecting the perchlorate adsorption on pillared bentonites. The significant increase of interlayer spacing, BET surface area and total pore volume suggested a larger amount of active adsorption sites of the pillared bentonites surface and a wider perchlorate channel from the surface to the inner adsorption sites of bentonites, respectively. The results during adsorption process represented that the adsorption capacity of perchlorate followed the order: Fe-Bent>Fe–Al-Bent>Al-Bent. The perchlorate uptake on these three modified bentonites from 0.1mmol/L solution rapidly attained equilibrium within 100min. Pseudo-second-order kinetic model could provide satisfactory fitting of the kinetic data (R2>0.99). The Langmuir model fitted the adsorption isotherm very well (R2>0.98). The thermodynamic analysis indicated that the adsorption process was endothermic and spontaneous in nature. The pH changes appeared to have a little impact on the perchlorate adsorption performance using the Fe-Bent. While perchlorate removal by Al-Bent and Fe–Al-Bent decreased significantly with the increase of pH. Co-existing anions tests showed that the order of anion influence of the adsorption amount of ClO4- on pillared bentonite was PO43->SO42->NO3-. The present study confirmed that inorganic-pillared bentonites would be one of candidates for perchlorate adsorbent.

Bromate Adsorption Using Fe-pillared Bentonite.

Enhanced Bromate Adsorption by Using Ɑ-Feooh Pillared Bentonite

Study on Removal of Bromid by Two Different Pillared Bentonite

Perchlorate Adsorption from Aqueous Solution on Inorganic-Pillared Bentonites

Bromate Removal from Aqueous Solutions by Ordered Mesoporous Carbon.

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Adsorption of Bromate from Emergently Polluted Raw Water Using Miex Resin: Equilibrium, Kinetic, and Thermodynamic Modeling Studies

Β-Feooh-coupled Activated Carbon Prepared by the High Temperature Impregnation Method for Bromate Removal from Water

Dissolved organic nitrogen (DON) adsorption by using Al-pillared bentonite

Adsorption-coupled Reduction of Bromate by Fe(II)–Al(III) Layered Double Hydroxide in Fixed-Bed Column: Experimental and Breakthrough Curves Analysis

Phenol adsorption properties and microstructural changes of organically modified bentonite

Adsorptive Bromate Removal from Aqueous Solution by Commercial Strongly Basic Resin Impregnated with Hydrated Ferric Oxide (HFO): Kinetics and Equilibrium Studies

Chemically Modified Chitosan Polymers for Bromate Removal

Sorption of Trace Levels of Bromate by Macroporous Strong Base Anion Exchange Resin: Influencing Factors, Equilibrium Isotherms and Thermodynamic Studies

Simultaneous Adsorption/Reduction Of Bromate By Nanoscale Zerovalent Iron Supported On Modified Activated Carbon

Comparative study on the adsorption kinetics and equilibrium of common water contaminants onto bentonite

Bromate Removal by Activated Carbon Adsorption: Material Selection and Impact Factors Study

Multiparameter optimization of bromate sorption on anion exchange resin by a two-step statistical strategy: Plackett–Burman and Box–Behnken experimental design

Removal of Rhodamine B Using Iron-Pillared Bentonite.

Removal of Fluoride from Aqueous Solution by Modified Al-Zr Pillared Bentonite

Adsorption equilibrium, isotherm, kinetics, and thermodynamic of modified bentonite for removing rhodamine b