Abstract:Water containing high concentrations of fluoride is widely distributed and seriously harmful, largely because long-term exposure to fluoride exceeding the recommended level will lead to fluorosis of teeth and bones. Therefore, it is imperative to develop cost-effective and environmentally friendly adsorbents to remove fluoride from polluted water sources. In this study, diatomite (DA), calcium bentonite (CB), bamboo charcoal (BC), and rice husk biochar (RHB) were tested as adsorbents to adsorb fluoride (F ‐ ) from water, and this process was characterized by scanning electron microscopy (FEI-SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR). The effects of pH, dosage, and the initial mass concentration of each treatment solution upon adsorption of F ‐ were determined. Kinetic and thermodynamic models were applied to reveal the mechanism of defluoridation, and an orthogonal experiment was designed to obtain the optimal combination of conditions. The results show that the surfaces of CB, BC, and RHB have an irregular pore structure and rough surface, whereas DA has a rich pore structure, clear pores, large specific surface area, and high silica content. With regard to the adsorption process for F ‐ , DA has an adsorption complex electron interaction; that of CB, BC, and RHB occur mainly via ion exchange with positive and negative charges; and CB on F ‐ relies on chemical electron bonding adsorption. The maximum adsorption capacity of DA can reach 32.20 mg/g. When the mass concentration of fluoride is 100 mg/L, the pH value is 6.0 and the dosage is 4.0 g/L; the adsorption rate of F ‐ by DA can reach 91.8%. Therefore, we conclude that DA soil could be used as an efficient, inexpensive, and environmentally friendly adsorbent for fluoride removal, perhaps providing an empirical basis for improving the treatment of fluorine-containing water in the future.

Β-Feooh-coupled Activated Carbon Prepared by the High Temperature Impregnation Method for Bromate Removal from Water

Simultaneous Adsorption/Reduction Of Bromate By Nanoscale Zerovalent Iron Supported On Modified Activated Carbon

Adsorptive Bromate Removal from Aqueous Solution by Commercial Strongly Basic Resin Impregnated with Hydrated Ferric Oxide (HFO): Kinetics and Equilibrium Studies

Robust Activity and Stability of P-Doped Fe-Carbon Composites Derived from MOF for Bromate Reduction

[Competitive Adsorption Between Bromine and Bromate on Activated Carbon and Impact on Bromate Formation].

Enhanced Performance and Mechanism of Bromate Removal in Aqueous Solution by Ruthenium Oxide Modified Biochar (Ruo2/bc)

Iron Nanoparticles-Confined Graphene Oxide Membranes Coupled with Sulfite-Based Advanced Reduction Processes for Highly Efficient and Stable Removal of Bromate

Magnetic Metallic Nanoparticles Coated with Carbon for the Catalytic Removal of Bromate from Water

Fe3C-porous carbon derived from Fe2O3 loaded MOF-74(Zn) for the removal of high concentration BPA: The integrations of adsorptive/catalytic synergies and radical/non-radical mechanisms

Aqueous bromate reduction by catalytic hydrogenation over Pd/Al2O3 catalysts

Construction of the micro-electrolysis system by Fe0 and clay-carbon derived from oil refining for the removal of ozone disinfection by-products

Efficient and Reductive Removal of Bromate Using a Novel and Stable Nanoscale Zero-Valent Iron Embedded in N-doped Carbon Derived from Metal-Organic Frameworks

Inhibition Of Bromate Formation By Surface Reduction In Catalytic Ozonation Of Organic Pollutants Over Beta-Feooh/Al2o3

Adsorption Characteristics and Charge Transfer Kinetics of Fluoride in Water by Different Adsorbents

Treatment of Aqueous Bromate by Superparamagnetic BiOCl-Mediated Advanced Reduction Process

Inhibition of Bromate Formation During Drinking Water Treatment by Adapting Ozonation to Electro-Peroxone Process

FeOCl-confined Activated Carbon for Improving Intraparticle Fenton-like Oxidation Regeneration

Preparation and performance of Fe(II)-akaganeite(β-FeOOH) modified red mud granule filter material

Boron-doped porous carbon boosts electron transport efficiency for enhancing Fenton-like oxidation capacity: High-speed driving of Fe(III) reduction

Biological bromate reduction coupled with in situ gas fermentation in H2/CO2-based membrane biofilm reactor

High flux Fe/activated carbon membranes for efficient degradation of organic pollutants in water by activating sodium persulfate