Abstract:Nano-zerovalent iron (nZVI) is a promising material for the removal of both organic and inorganic pollutants from contaminated water. This study investigates the potential of a novel composite of nZVI on a polymer-derived supporting ceramic (nZVI-PDC) synthesized via the liquid-phase reduction method for the simultaneous adsorption and Fenton-type reduction of bromate anion (BrO3-) in water. The nZVI nanoparticles were effectively anchored onto the PDC by impregnating high-yield carbon in a ferrous sulfate solution. The PDC facilitated the uniform dispersion of nZVI nanoparticles due to its multiple active sites distributed within mesocarbon cavities. The developed nZVI-PDC composite exhibited a high specific surface area of 837 m2 g-1 and an ordered mesoporous structure with a pore volume of 0.37 cm3 g-1. As an adsorbent, the nZVI-PDC composite exhibited a maximum adsorption capacity (qe) of 842 mg g-1 and a partition coefficient (KH) of 10.2 mg g-1 μM-1, as calculated by the pseudo-second-order model. As a catalyst, the composite demonstrated a reaction kinetic rate of 43.5 μmol g-1 h-1 within 6 h at pH 4, using a dosage of 60 mg L-1 nZVI-PDC and a concentration of 0.8 mmol L-1 H2O2. Comparatively, PDC exhibited a qe of 408 mg g-1, KH of 1.67 mg g-1 μM-1, and a reaction rate of 20.8 μmol g-1 h-1, while nZVI showed a qe of 456 mg g-1, KH of 2.30 mg g-1 μM-1, and a reaction rate of 27.2 μmol g-1 h-1. The modelling indicated that the nZVI-PDC composite followed pseudo-second-order kinetics. The remarkable removal efficiency of the nZVI-PDC composite was attributed to the synergistic effects between PDC and nZVI, where PDC facilitated charge transfer, promoting Fe2+ generation and the Fe3+/Fe2+ cycle. Overall, this work introduces a promising adsorption technology for the efficient removal of BrO3- from contaminated aqueous solutions, highlighting the significant potential of the nZVI-PDC composite in water purification applications.

Robust Activity and Stability of P-Doped Fe-Carbon Composites Derived from MOF for Bromate Reduction

Boosting the Activity of Fe-Nx Moieties in Fe-N-C Electrocatalysts Via Phosphorus Doping for Oxygen Reduction Reaction

Efficient and Reductive Removal of Bromate Using a Novel and Stable Nanoscale Zero-Valent Iron Embedded in N-doped Carbon Derived from Metal-Organic Frameworks

Highly Effective Bromate Reduction by Liquid Phase Catalytic Hydrogenation over Pd Catalysts Supported on Core-Shell Structured Magnetites: Impact of Shell Properties.

Boron-doped porous carbon boosts electron transport efficiency for enhancing Fenton-like oxidation capacity: High-speed driving of Fe(III) reduction

Enhanced redox cycle of Fe 3+ /Fe 2+ on Fe@NC by boron: Fast electron transfer and long-term stability for Fenton-like reaction

Fe3C-porous carbon derived from Fe2O3 loaded MOF-74(Zn) for the removal of high concentration BPA: The integrations of adsorptive/catalytic synergies and radical/non-radical mechanisms

Adsorption-coupled Fenton type reduction of bromate in water by high-yield polymer-derived ceramic-supported nano-zerovalent iron

Uniform N-coordinated single-atomic iron sites dispersed in porous carbon framework to activate PMS for efficient BPA degradation via high-valent iron-oxo species

Coating CoFe 2 O 4 shell on Fe particles to increase the utilization efficiencies of Fe and peroxymonosulfate for low-cost Fenton-like reactions

Fe and Zn co-doped carbon nanoparticles as peroxymonosulfate activator for efficient 2,4-dichorophenol degradation

Enhanced peroxymonosulfate activation via MOF-derived bimetal core-shell Co-Fe@NC hybrids to degrade emerging pollutants

Magnetic Metallic Nanoparticles Coated with Carbon for the Catalytic Removal of Bromate from Water

Iron Nanoparticles-Confined Graphene Oxide Membranes Coupled with Sulfite-Based Advanced Reduction Processes for Highly Efficient and Stable Removal of Bromate

Highly Efficient Utilization of Nano-Fe(0) Embedded in Mesoporous Carbon for Activation of Peroxydisulfate

Highly efficient activation of peroxymonosulfate by cobalt ferrite anchored in P-doped activated carbon for degradation of 2,4-D: Adsorption and electron transfer mechanism

Enhanced cycling of Fe(III)/Fe(II) and mass transfer strategy for efficient and stable activation of peroxydisulfate for water decontamination via a flow-through Fe-MOFs cathode

PMo12-doped Carbon Ceramic Composite Electrode Based on Sol-Gel Chemistry and Its Electrocatalytic Reduction of Bromate

Metal-free black-red phosphorus as an efficient heterogeneous reductant to boost Fe3+/Fe2+ cycle for peroxymonosulfate activation

Facile tuning Non-radical/Radical oxidation by nitrogen doping on Fe-S doped carbonaceous catalysts for peroxymonosulfate activation

Highly stable removal of low concentration phosphorus by mechanically activated FeCO 3 : In situ synergistic mechanisms