Abstract:In this study, a new calcined iron-based layered double hydroxide material was synthesized to adsorb perchlorate from water. The MgFe–CO3 layered double hydroxides (MgFe-LDH) were prepared at pH 9–10 and with different molar Mg/Fe ratios (2–5) using a co-precipitation method, and then calcined at a temperature range of 300–900°C. Results showed that the best synthesis conditions to maximize the perchlorate adsorption capacity of the calcined MgFe–CO3 layered double hydroxide (MgFe-CLDH) were the calcination temperature of 550°C and [Mg]/[Fe]=3. Furthermore, the adsorbents and their adsorption products were characterized by X-ray, FT-IR and thermogravimetric analyses. The layered double hydroxide structures in the adsorbent were lost during calcination at 550°C, but were reconstructed subsequent to adsorption of perchlorate, indicating that the ‘memory effect’ appeared to play an important role in perchlorate adsorption. The perchlorate adsorption pattern was well described by the pseudo-second-order kinetic model, while the Freundlich isotherm provided the best fitting of adsorption isotherms with the experimental data at chemical equilibrium at 25°C. Indeed, an initial solution pH of 4–10, a higher adsorbent dose, and a lower initial perchlorate concentration typically favored the removal of perchlorate from water. Furthermore, co-existing anions, including PO43−, SO42−, Cl− and NO3−, inhibited the perchlorate adsorption, to different degrees. At 25°C, MgFe-3 CLDH=1.33g/L (calcination temperature=550°C and [Mg]/[Fe]=3), and the initial solution pH of 4–10, 2000μg/L of perchlorate was almost all adsorbed within 720min. This study demonstrated that the new calcined iron-based layered double hydroxide was a promising adsorbent for control of the perchlorate pollution in water.

Perchlorate Adsorption from Aqueous Solution on Inorganic-Pillared Bentonites

Enhanced Bromate Adsorption by Using Ɑ-Feooh Pillared Bentonite

Bromate Adsorption Using Fe-pillared Bentonite.

Bentonite Modified with Cetyltrimethylammonium Chloride As Highly Efficient Anion Exchanger for Perchlorate Ion

Adsorption of Pb (II) from Aqueous Solution by Modified Bentonite

Enhanced Adsorption of Aqueous Perchlorate on Quaternary Ammonium Chloride Surfactant-Modified Activated Carbon Fibers

Perchlorate Adsorption Onto Orange Peel Modified by Cross-Linking Amine Groups from Aqueous Solutions

Dissolved organic nitrogen (DON) adsorption by using Al-pillared bentonite

Preparation, Characterization and Adsorption Performance of Cetyl Pyridine Bromide Modified Bentonites

Removal of Perchlorate from Aqueous Solution Using Quaternary Ammonium Modified Magnetic Mg/Al-layered Double Hydroxide

[Adsorption of Perchlorate from Water by Protonated Cross-Linked Chitosan Gel Beads].

Study on Removal of Bromid by Two Different Pillared Bentonite

Perchlorate Adsorption by Aluminum Hydroxide Synthesized through Hydrothermal Oxidation Process

Removal of Perchlorate Contaminants by Calcined Zn/Al Layered Double Hydroxides: Equilibrium, Kinetics, and Column Studies

Effect of Polyelectrolyte Structure on Perchlorate Adsorption Performance by Functionalized Montmorillonite

Organoclays of high-charge synthetic clays and alumina pillared natural clays: Perchlorate uptake

Perchlorate removal by quaternary amine modified reed.

Adsorption of Perchlorate in Water by Granular Activated Carbon and Impact Factors Analysis

Adsorption of perchlorate from water using calcined iron-based layered double hydroxides

Green Quaternary Ammonium Nitrogen Functionalized Mesoporous Biochar for Sustainable Electro-Adsorption of Perchlorate

Adsorption Equilibrium And Kinetic Performances Of Al-Pillared Bentonite For Removal Of Cadmium(Ii) From Aqueous Solutions