Abstract:A set of modified PbO(2) anodes doped with the oxides of Bismuth and Cobalt were prepared by the means of electrodeposition in nitrate solutions. These electrodes were characterized in terms of their morphological (SEM) and structural (XRD) features The electrochemical activities of these modified electrodes were investigated by means of cyclic voltammetry and bulk electrolysis and compared with undoped PbO(2) electrode The Ti/Bi-PbO(2) anode had the highest overpotential of 1.75 V (vs SCE) for oxygen evolution. Both XRD patterns and SEM images demonstrated that the incorporation of B1 could diminish the size of the crystal particles. Oxidants such as hydroxyl radical, hydrogen peroxide were determined, and their amount was proportional to the electrocatalyitc activities of modified PbO(2) anodes. Electrocatalytic oxidation of o-nitrophenol was conducted by using these anodes as anode and stainless steel sheet as cathode. Ti/Bi-PbO(2) anode displayed not only excellent electrocatalytic performance but also low energy consumption. The Ti/Bi-PbO(2) anode is a promising anode for the treatment of organic pollutants. Furthermore, the electrocatalytic oxidation of o-nitrophenol (o-NP), m-nitrophenol (m-NP) and p-nitrophenol (p-NP) has also been studied at Bi-doped lead dioxide anodes on acid medium by cyclic voltammetry and bulk electrolysis The results of voltammetric studies indicated that these nitrophenol isomers were indirectly oxidized by OH radical in the solutions. Within the present experimental conditions used (50 mg of nitrophenol L(-1), pH 4.3, 30 mA cm(-2), 303 K), the complete decomposition of nitrophenols (NPs) was achieved The electrocatalytic oxidation of NPs lay in the order. o-NP>m-NP> p-NP. Molecular configuration including the electron character and hydrogen bonds of NPs significantly Influenced the electrocatalytic oxidation of these isomers. Hydroquinone, catechol, resorcinol, benzoquinone, aminophenols, glutaconic acid and maim acid and oxalic acid have been detected as soluble products during the electrolysis of NPs The possible degradation pathways of these Isomers were proposed The first stage is the release of nitro group from the aromatic rings. As a consequence, hydroquinone, catechol, resorcinol and benzoquinone are formed These organic compounds are oxidized initially to carboxylic acids (Glutaconic acid, maleic acid and oxalic acid) and later to carbon dioxide and water. Simultaneously, the reduction of NPs to aminophenols takes place at the cathode.

Preparation and electrochemical properties of Ce-Ru-SnO 2 ternary oxide anode and electrochemical oxidation of nitrophenols

Preparation and Studies on the Electrocatalytic Properties of Modified SnO2 Anodes

Investigation on electrochemical properties of cerium doped lead dioxide anode and application for elimination of nitrophenol

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Electrocatalytic Properties Of Modified Lead Dioxide Electrodes And Oxidation Mechanism Of Nitrophenols

Synthesis of a novel Ti/TiO 2 Blue/SnO 2 -Sb@Ni-La electrode and the way to improve the degradation efficiency of some organic pollutants in electrochemical process using Ti/TiO 2 Blue/SnO 2 -Sb@Ni-La as anode

Effect of SnO2 addition on the service life and electrochemical properties of Ti/IrO2+Ta2O5 anodes in phenolsulphonic acid solution

Electro-catalytic Oxidation for the Degradation of Nitrophenols in Aqueous Solution on Modified PbO2 Anodes

Preparation of a novel Ce and Sb co-doped SnO2 nanoflowers electrode by a two-step (hydrothermal and thermal decomposition) method for organic pollutants electrochemical degradation

Electrocatalytic oxidation of nitrophenols in aqueous solution using modified PbO 2 electrodes

Electrochemical Degradation of P-Nitrophenol on Carbon Nanotube and Ce-modified-PbO2 Electrode

Electrocatalytic oxidation of nitrophenols in aqueous solution using modified PbO<sub>2 </sub>electrodes

Fabrication of Cerium-Doped Lead Dioxide Anode with Improved Electrocatalytic Activity and Its Application for Removal of Rhodamine B

Ultrasonic-electrodeposition Construction of High Hydrophobic Ce-PDMS-PbO2/SS Electrode for P-Nitrophenol Degradation: Catalytic, Kinetics and Mechanism

Influence of rare earths doping on the structure and electro-catalytic performance of Ti/Sb–SnO2 electrodes

Investigation on the Electrocatalytic Characteristics of SnO 2 Electrodes with Nanocoating Prepared by Electrodeposition Method

Enhanced performance of an Al-doped SnO2 anode for the electrocatalytic oxidation of organic pollutants in water

Surface Modification of CeO2-x Nanorods with Sn Doping for Enhanced Nitrogen Electroreduction

Electrochemical oxidation of Rhodamine B with cerium and sodium dodecyl benzene sulfonate co-modified Ti/PbO2 electrodes: Preparation, characterization, optimization, application

Investigation on Preparation and Electrocatalytic Characteristics of Ti-base SnO2 Electrode with Nano-Coating

Comparative Study of the Electrocatalytic Oxidation and Mechanism of Nitrophenols at Bi-Doped Lead Dioxide Anodes