Preparation of a Three-Dimensional Porous PbO2-CNTs Composite Electrode and Study of the Degradation Behavior of P-Nitrophenol
Hongjun You,Zhen Chen,Qiang Yu,Wei Zhu,Bangyao Chen,Ze Lv,Qi Hu,Yuanyuan Liu,Zhaoyi Zheng,Shuting Li,Farhana Yeasmin
DOI: https://doi.org/10.1016/j.seppur.2021.119406
IF: 8.6
2021-01-01
Separation and Purification Technology
Abstract:In this study, a new type of porous PbO2-CNTs electrode was prepared by the oxygen bubble template method to remove the organic pollutant p-nitrophenol in water. The electrode microscopic morphology, phase composition and element composition were characterized by physical methods such as scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). According to linear scanning voltammetry (LSV), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), the 3D-PbO2-CNTs composite electrode shows a higher exchange current density, larger electrochemically active surface area and smaller charge transfer resistance than the 3D-PbO2 and flat-PbO2-CNT electrodes. The 3D-PbO2-CNTs composite electrode was applied to the degradation of p-nitrophenol, and the results indicate that it has the strongest ability to generate hydroxyl radicals and the best electrocatalytic degradation efficiency. The degradation process follows pseudo-first-order reaction kinetics, and the intermediate products were characterized using GC-MS and a degradation mechanism for p-nitrophenol was proposed. From measurements of the cell voltage for degrading simulated phenolic wastewater, it was found that the battery voltage for the 3D-PbO2-CNTs composite electrode is 3.52 V, which is lower than that obtained for the 3D-PbO2 (3.59 V) and flat-PbO2-CNTs (3.85 V) electrodes, indicating that the anode material is effective in reducing energy consumption. In general, the new 3D-PbO2-CNTs electrode has good application prospects in the field of degrading organic polluted wastewater.