Abstract:Discontinuous dynamic recrystallisation (DDRX) is a well-known phenomenon playing a significant role in the high-temperature processing of metals, including industrial forming and severe plastic deformations. The ongoing discussion on the Zener–Hollomon (Z–H) parameter as a descriptor of materials' propensity to DDRX and a measure of microstructure homogeneity leaves more questions than answers and prevents its practical application. Most of the existing DDRX models are continuous, and so the geometry and topology of real grain microstructures cannot be considered. The present study uses a fully discrete representation of polycrystalline aluminium alloys as 2D/3D Voronoi space tessellations corresponding to EBSD maps. Such tessellations are geometric realisations of combinatorial structures referred to as polytopal cell complexes. Combining discrete models with FEM LS-Dyna simulations of shock-wave propagation in AA1050 and AW5083 aluminium alloys makes it possible to estimate for the first time the contribution of DDRX to the final material microstructure inside adiabatic shear bands. It is shown that the increase of the initial fraction of high-angle grain boundaries, caused by preliminary deformation, significantly increases the spatial homogeneity and decreases the clustering of DDRX grains. The obtained results contradict the conventional assumption that the microstructures obtained by severe plastic deformation under quasi-static and dynamic deformation conditions are similar due to the similar value of the Z–H parameter: competition between the two recrystallisation mechanisms leads to almost unpredictable final grain structures inside share bands that require further comprehensive experimental studies. This agrees with experimental evidence for high material sensitivity to the Z–H parameter.

3d Characterization Of Recrystallization Boundaries

Advancement In Characterization And Modeling Of Boundary Migration During Recrystallization

Boundary Migration in a 3D Deformed Microstructure Inside an Opaque Sample

Local Boundary Migration During Recrystallization in Pure Aluminium

In-Situ Observations of Migration of Recrystallization Boundaries in Pure Aluminium

Selective growth of recrystallizing grains into well-characterized deformed aluminum at hardness indentation

3D Ebsd Characterization of Deformation Structures in Commercial Purity Aluminum

Boundary Migration During Recrystallization of Heavily Deformed Pure Nickel

Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomography

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Non-uniform Grain Boundary Migration During Static Recrystallization: A Cellular Automaton Study

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Effect of One-Step Recrystallization on the Grain Boundary Evolution of Cocrfemnni High Entropy Alloy and Its Subsystems

Discrete model for discontinuous dynamic recrystallisation applied to grain structure evolution inside adiabatic shear bands

Investigation of Boundary Migration During Grain Growth in Fully Recrystallised High Purity Nickel

Revealing Grain Boundary Kinetics in Three-Dimensional Space

Measurements of the Curvature of Protrusions/Retrusions on Migrating Recrystallization Boundaries

Characterization and Influence of Deformation Microstructure Heterogeneity on Recrystallization

Multiscale in-situ characterization of static recrystallization using dark-field X-ray microscopy and high-resolution X-ray diffraction

A molecular dynamics study of path-dependent grain boundary properties in nanocrystals prepared using different methods