Abstract:Polymerase chain reaction (PCR) is the most common method used for nucleic acid (DNA) amplification. The development of PCR-performing microfluidic reactors (μPCRs) has been of major importance, due to their crucial role in pathogen detection applications in medical diagnostics. Closed loop (CL) is an advantageous type of μPCR, which uses a circular microchannel, thus allowing the DNA sample to pass consecutively through the different temperature zones, in order to accomplish a PCR cycle. CL μPCR offers the main advantages of the traditional continuous-flow μPCR, eliminating at the same time most of the disadvantages associated with the long serpentine microchannel. In this work, the performance of three different CL μPCRs designed for fabrication on a printed circuit board (PCB) was evaluated by a computational study in terms of the residence time in each thermal zone. A 3D heat transfer model was used to calculate the temperature distribution in the microreactor, and the residence times were extracted by this distribution. The results of the computational study suggest that for the best-performing microreactor design, a PCR of 30 cycles can be achieved in less than 3 min. Subsequently, a PCB chip was fabricated based on the design that performed best in the computational study. PCB constitutes a great substrate as it allows for integrated microheaters inside the chip, permitting at the same time low-cost, reliable, reproducible, and mass-amenable fabrication. The fabricated chip, which, at the time of this writing, is the first CL μPCR chip fabricated on a PCB, was tested by measuring the temperatures on its surface with a thermal camera. These results were then compared with the ones of the computational study, in order to evaluate the reliability of the latter. The comparison of the calculated temperatures with the measured values verifies the accuracy of the developed model of the microreactor. As a result of that, a total power consumption of 1.521 W was experimentally measured, only ~7.3% larger than the one calculated (1.417 W). Full validation of the realized CL μPCR chip will be demonstrated in future work.

Realization of a Μpcr System and Its EC Detection Circuits

Integration of micro-PCR with CMOS EC detection: Opportunity and challenges

Characteristic Investigation of a Static Micro Polymerase Chain Reaction Chip Based on in Situ Electrochemical Detection

Design of Logarithmic Current Amplifier for Micro-Pcr EC Detection

A 69μw Dual-Mode Electrochemical Mir-21 Detection SoC with 3Rd-Harmonic Direct-Solution Technique

Real-time PCR microfluidic devices with concurrent electrochemical detection

A high-performance polycarbonate electrophoresis microchip with integrated three-electrode system for end-channel amperometric detection.

Closed-Loop Microreactor on PCB for Ultra-Fast DNA Amplification: Design and Thermal Validation

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

Amplification of Escherichia coli in a Continuous-Flow-PCR Microfluidic Chip and Its Detection with a Capillary Electrophoresis System

An Integrated, Real-Time Convective PCR System for Isolation, Amplification, and Detection of Nucleic Acids

PCR-based detection in a micro-fabricated platform

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

Design and Operation of a Portable Scanner for High Performance Microchip Capillary Array Electrophoresis.

Chip Pcr .2. Investigation Of Different Pcr Amplification Systems In Microfabricated Silicon-Glass Chips

Electrochemical Detection Modes for Microchip Capillary Electrophoresis

Microchip capillary electrophoresis with solid-state electrochemiluminescence detector.

Sophisticated and precise: design and implementation of a real-time optical detection system for ultra-fast PCR

Open Thermal Control System for Stable Polymerase Chain Reaction on a Digital Microfluidic Chip

A multi-channel readout electronics system for GEM and MICROMEGAS