Abstract:Implementing advanced cooling strategies is essential to maintaining recommended operation conditions, enhancing energy efficiency, and extending the reliability of ultra-high concentrator photovoltaics. This study introduces a new application of sintered porous media as an effective and superior thermal management solution for ultra-high concentrator photovoltaic systems. Furthermore, predictive models for thermal and electrical performance are developed, marking a significant advancement in the field. A comprehensive three-dimensional computational fluid dynamics model was developed and verified against experimental work reported to investigate the performance of a novel sintered porous media for thermal management in ultra-high concentrator photovoltaics. Furthermore, the response surface methodology coupled with analysis of variance was used to analyze and comprehensively optimize the thermal management system. The main objective is to develop a predictive model for such systems equipped with a porous cooling system that predicts performance with a concentration ratio of up to 20,000 Suns. Predictive models were formulated to outline the relationships between various independent variables: Reynolds number, concentration ratio, direct normal irradiance, wind speed, optical efficiency, fluid inlet temperature, and dependent performance metrics. This study analysis highlights the effectiveness of sintered porous media in heat dissipation and efficiency enhancement in ultra-high concentrator photovoltaics thermal management. The results demonstrate that using sintered porous media compared to conventional channel heatsinks significantly enhances cell thermal management. Specifically, this approach reduces cell temperature by 15.3%, 8.97%, and 2% at concentration ratios of 20,000, 10,000, and 2,000, respectively. Concurrently, implementing the new sintered porous media heatsink improves cell efficiency by 3.1%, 1.5%, and 0.3% for the same respective concentration ratio values.

A Jet Impingement/Channel Receiver for Cooling Densely Packed Photovoltaic Cells under A Paraboloidal Dish Solar Concentrator

Microchannel cooling of concentrator photovoltaics: A review

Numerical Analysis of a Multi-Channel Active Cooling System for Densely Packed Concentrating Photovoltaic Cells

Simulated Performance Analysis of a Hybrid Water-Cooled Photovoltaic/Parabolic Dish Concentrator Coupled with Conical Cavity Receiver

Enhancing the performance of low-concentrator photovoltaic systems using novel configurations of radially microchannel heat sinks

Improved cooling of photovoltaic panels by natural convection flow in a channel with adiabatic extensions

Experimental investigation on thermal management of a photovoltaic module using water-jet impingement cooling

The Effect of the Cooling Nozzle Arrangement to the Thermal Performance of a Solar Impinging Receiver

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

HEAT TRANSFER ENHANCEMENT OF A NEW SINGLE-PHASE HYBRID COOLING SCHEME OF MICROCHANNEL AND MICROJET IMPINGEMENT

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Improving the performance of solar photovoltaic thermal cells using jet impingement and phase change materials cooling technology

Jet array impingement boiling in compact space for high heat flux cooling

Flow and Heat Transfer Performance of Array Finned Channel Coupled Jet Heat Sink

Thermal Management of Ultra High Concentrator Photovoltaic Cells: Analysing the Impact of Sintered Porous Media Microchannel Heat Sinks

Modeling of solar CPVT system integrated with heat sinks in existence of hybrid nanofluid

Integrated Model for Comprehensive Performance Investigation of Solar Concentrated Photovoltaic‐Thermal System Embedded with Microchannel Heat Sinks

Topology optimization and numerical analysis of cold plates for concentrating photovoltaic thermal management

Experimental investigation and exergy analysis of a high concentrating photovoltaic system integrated with spray cooling

Optical Modeling for A Two-Stage Parabolic Trough Concentrating Photovoltaic/Thermal System Using Spectral Beam Splitting Technology

Experimental Study on Active Cooling for Concentrating Photovoltaic Cells Working at High Concentration Ratios