Abstract:This study presents a numerical analysis of the energy efficiency for a novel solar PVT Loop Heat Pipe (PVT-LHP) employing a novel Micro-channel evaporator and a novel PCM heat storage exchanger. It presents a description of the different sub-models in the PVT-LHP system (the PVT model, the microchannel heat collector model and the novel PCM triple heat exchanger model) and the integrated model of the system. The integrated model of the system was solved by ensuring a heat balance at the condenser and the evaporator. A parametric analysis has been performed in order to assess the influence of the environmental parameters (i.e. solar radiation, air temperature, wind velocity), structural parameters (i.e. glazing cover, the number of absorbing microchannel heat pipes, PV cell packing factor), the circulating fluid variables (i.e. cold-water inlet temperature and water mass flow rate) on the energy performance of the system. The novel PVT-LHP has been compared with a conventional Solar PVT-LHP system. It was found that lower solar radiation, lower ambient air temperature, higher wind speed, higher packing factor, lower cold-water inlet temperature and a smaller cover number led to an enhanced electrical efficiency, but a reduced thermal efficiency of the module; whereas a higher cold-water mass flow rate and a greater number of microchannel heat pipes gave rise to both thermal and electrical efficiencies of the module. It was also found that an increase of solar radiation, ambient temperature, cover number, microchannel heat pipe number and packing factor are favourable factors for the overall COP (Coefficient Of Performance) of the system, whereas an increase of wind velocity and cold water mass flow rate are unfavourable. The study indicated the existence of an optimal cover number, number of microchannel heat pipes and mass flowrate. Under the given design conditions, the electrical, thermal and overall efficiency of the PV/LHP module were 12.2%, 55.6% and 67.8% respectively and the novel system can achieve 28% higher overall energy efficiency and 2.2 times higher COP compared to a conventional system. The integrated computer model developed in this study can be used to design and optimize the novel PVT-LHP heating system.

Integrated Model for Comprehensive Performance Investigation of Solar Concentrated Photovoltaic‐Thermal System Embedded with Microchannel Heat Sinks

Enhancing the performance of low-concentrator photovoltaic systems using novel configurations of radially microchannel heat sinks

Modeling of solar CPVT system integrated with heat sinks in existence of hybrid nanofluid

Optical, electrical, and thermal performance of low-concentrating photovoltaic/thermal system using microencapsulated phase change material suspension as a coolant

Thermal Management of Ultra High Concentrator Photovoltaic Cells: Analysing the Impact of Sintered Porous Media Microchannel Heat Sinks

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

Simulated Performance Analysis of a Hybrid Water-Cooled Photovoltaic/Parabolic Dish Concentrator Coupled with Conical Cavity Receiver

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Analysis Of A Concentrating Photovoltaic/Thermal Solar System

ANALYSIS OF THE PERFORMANCE FOR A CONCENTRATING PHOTOVOLTAIC/THERMAL SOLAR SYSTEM

Numerical Simulation and Experimental Validation of A High Concentration Photovoltaic/Thermal Module Based on Point-Focus Fresnel Lens

Model construction and electro-thermal-hydrogen co-generation performance for multi-section compound parabolic concentrator

Electrical and Thermal Performance Analysis for a Highly Concentrating Photovoltaic/Thermal System

Thermal and fluid dynamic analysis of a flat manifold microchannel heat sink in parabolic trough solar collector with optical errors

Optimal Design and Performance Analysis of a Low Concentrating Photovoltaic/Thermal System Using the Direct Absorption Collection Concept

Thermal analysis of a high concentration photovoltaic/thermal system

Experimental and Numerical Comparative Investigation on a Concentrating Photovoltaic System

Thermodynamic Analysis for a Concentrating Photovoltaic-Photothermochemical Hybrid System

Solar radiation transfer and performance analysis for a low concentrating photovoltaic/thermal system

Energy Performance Analysis of a Novel Solar PVT Loop Heat Pipe Employing a Microchannel Heat Pipe Evaporator and a PCM Triple Heat Exchanger

Performance investigation of a concentrated photovoltaic-thermoelectric hybrid system for electricity and cooling production