Study on Extraction of Alumina from Sericite Phyllite

Hongwei Zhao,Kaiqi Liu,Zhuang Li,Zhaohui Huang

DOI: https://doi.org/10.4028/www.scientific.net/kem.544.38

2013-01-01

Key Engineering Materials

Abstract:Alumina from sericite phyllite was extracted by the way of limestone self-pulverization sintering technique. The key technical processes, including self-pulverization sintering, clinker leaching reaction and the carbonation decomposition, were investigated systematically. The results showed that the main phases of pulverized clinker consisted of γ-C2S and C12A7, and the self-pulverization rate was 95% . The dissolution rate of Al2O3 clinker could reach 86.7% when the concentration of Na2CO3 solution was 7% and the solid-liquid ratio was 1:3. The Al(OH)3 prepared at 80°C carbonation temperature and pH=10.5 was relatively pure, with hexagonal plate-like crystals. The α-alumina could be acquired by calcination at 1200°C with the content of 99.71% Al2O3 and 0.02% Na2O. This work provided optimal technological parameters for effectively extracting alumina from the sericite and other inexpensive non-bauxite mineral resources with A/S ratio lower than 1.