Abstract:Introduction: Increasingly aspherical optics are used in contact lens designs to produce a varifocal effect to correct presbyopia. Whilst no current ISO standard describes a method to verify these products, the vertex power needs to be verified by the manufacturer and optometrist. Visionix claim that the VC2001 instrument is able to resolve the vertex power of complex contact lenses and that it has been adopted by contact lens manufacturers as their "gold standard" method of measure. Practitioners rely on the focimeter for contact lens verification and accept that it has poorer resolution. This raises the question of whether practitioners can verify the vertex powers of varifocal contact lenses to a sufficient sensitivity. The purpose of this study is to determine whether a focimeter can differentiate between various vertex powers incorporating differing degrees of asphericity that are used in contact lens designs. Methods: A range of varifocal contact lenses were used with single vision contact lenses as controls. Three types of focimeters were used: a manual focimeter, a projector focimeter and a computerised focimeter (standard and contact lens modes). The VC2001 assessed the vertex powers over the optical zone and was used as a reference for the focimeters. The measures from the VC2001 and the focimeters were analysed by discrepancy analysis. Results: All discrepancy measures fell outside two standard deviations for either the varifocal contact lenses or the single vision contact lenses when the focimeters were compared to the VC2001. This raises the issue of whether the focimeters are measuring the same parameter as the VC2001. Only the analysis of the repeated measurements from the manual focimeter for single vision contact lenses demonstrated an acceptable measure of precision (+/-0.21, 2S.D.) with a very small degree of bias (mean difference -0.024, +/-0.02 [2S.E.]). Conclusion: These results suggest that the manual focimeter can measure the vertex powers for single vision contact lenses to an acceptable degree of precision. The vertex powers of varifocal lenses cannot be verified using standard practice equipment. The VC2001 has poor precision for power measurements and may not be measuring the same parameter as the focimeters and therefore questions the validity of the VC2001 as the "gold standard" for vertex power measurement.

Application of Laser Differential Confocal Technique in Back Vertex Power Measurement for Phoropters

Overcoming the Error of Optical Power Measurement Caused by the Curvature Radius.

Overcoming the error of power measurement caused by the curvature radius

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Laser Differential Confocal Paraboloidal Vertex Radius Measurement.

A SCANNING FOCIMETER TO MEASURE PERIPHERAL LENS POWERS

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Laser Differential Confocal Lens Refractive Index Measurement

Experimental Research on Radius of Curvature Measurement of Spherical Lenses Based on Laser Differential Confocal Technique

Subjective quasi‐vector‐based refraction with a conventional phoropter

Verification of the vertex powers of varifocal rigid contact lenses

Laser Differential Confocal Ultra-Long Focal Length Measurement

Laser Differential Confocal Ultra-Large Radius Measurement for Convex Spherical Surface

Automatic Measurement of Center Deviation of Lens of Laser Differential Confocal

A Data Processing Method Based on Tracking Light Spot for the Laser Differential Confocal Component Parameters Measurement System

Laser Differential Confocal Interference Multi-Parameter Comprehensive Measurement Method and Its System for Spherical Lens.

Laser Differential Reflection-Confocal Lens Thickness Measurement

Laser Differential Reflection-Confocal Focal-Length Measurement.

Laser Multi-Reflection Differential Confocal Long Focal-Length Measurement.

Laser Differential Confocal Radius Measurement Method for the Cylindrical Surfaces.

High-precision Radius Automatic Measurement Using Laser Differential Confocal Technology