Study of an SPP mode with gain medium based on a hybrid plasmonic structure

Ning Zhu,Ting Mei

DOI: https://doi.org/10.1364/acpc.2012.af4a.17

2012-01-01

Abstract:We propose and study a hybrid plasmonic waveguide structure with gain medium. The structure is based on silicon with gain medium to be III-V compound semiconductor, which can be realized by bonding technology.

What problem does this paper attempt to address?

Plasmonic hybridized modes empowered by strong plasmon interaction in the nanograting-dielectric-metal stacked structure

Xinran Wei,Yuzhang Liang,Yiding Zheng,Kaili Kuang,Qiao Wang,Yi Han,Cheng Yang,Yurui Fang,Wei Peng

DOI: https://doi.org/10.1088/1361-6463/ad2ab3

2024-02-20

Journal of Physics D Applied Physics

Abstract:The coupling between surface plasmon polaritons (SPPs) and waveguide (WG) modes has been widely investigated by using prism-coupled structures and has demonstrated a large number of interesting physical phenomena. However, these conventional structures mainly rely on the angle-dependent total internal reflection excitation. This is not conducive to their further development due to the large volume and the requirement of oblique incidence. In this paper, we theoretically propose a three-layer nanograting-dielectric-metal (NDM) plasmonic structure. Within this structure, a thickness-dependent plasmonic waveguide (PWG) mode in the middle dielectric cavity strongly couples with SPPs on the top surface, resulting in two new hybridized PWG-SPPs modes. This hybridization coupling phenomenon is analyzed in detail by using plasmonic hybridization and two coupled oscillator models. Besides, a thorough investigation is conducted on the sensing performance of these two PWG-SPPs hybridized modes. The difference in sensing characteristics between these two hybridized modes can be well explained by their coupling strength variation. This NDM plasmonic nanostructure owns unparalleled advantages in the generation and modulation of a variety of new modes, effectively promoting the development of miniaturized optoelectronic devices.

physics, applied
SPP Waveguide of CdS Nanowires and Graphene Nanobelts

Jun Zhu,Zhengjie Xu,Wenju Xu,Yunbai Qin,Duqu Wei

DOI: https://doi.org/10.1016/j.ijleo.2017.10.069

IF: 3.1

2018-01-01

Optik

Abstract:Graphene has potential to replace germanium as compound semiconductor for high-performance devices because of its unique optoelectronic properties and availability of existing integrated circuit manufacturing technology. This study investigates surface plasmon polariton (SPP) waveguide-based interaction between CdS nanowires and graphene nanobelts to determine shortcomings of the existing technology. The structure uses MgF2 as cladding, which symmetrically covers CdS nanowires and graphene nanobelts. An air gap of same width is etched in middle of CdS nanowires and graphene nanobelts. SPP is optically excited. Gain compensation is obtained through coupling effect of nanowires, capacitance-enhanced effect of air gap and GaAs semiconductor material, and low refractive index of buffer layer to reduce transmission loss. The structure can achieve strong photon localization and easily implement low threshold for nanometer laser. Experiments on characteristics of SPP show that increasing air gap width of structure reduces transmission loss and increases limiting factors. Limiting factor of waveguide structure is less than 0.15, which indicates ultra-deep subwavelength constraints. SPP waveguide can be integrated with various nanophotonic and electronic devices and has broad application prospects in optical sensing, optical communication, and other fields.
Modulator of surface plasmon polariton based cycle branch graphene waveguide

Jun Zhu,Zhengjie Xu,Wenju Xu,Duqu Wei

DOI: https://doi.org/10.5714/CL.2018.25.084

2018-01-01

Carbon letters

Abstract:At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene-LiNbO3-graphene, and a secondary cycle branch waveguide is etched on the surface of LiNbO3. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about 0.0130 lambda(2), the gain coefficient is about 700 cm(-1), and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.
Gain enhancement in a hybrid plasmonic nano-waveguide with a low-index or high-index gain medium.

Daoxin Dai,Yaocheng Shi,Sailing He,Lech Wosinski,Lars Thylen

DOI: https://doi.org/10.1364/OE.19.012925

IF: 3.8

2011-01-01

Optics Express

Abstract:A theoretical investigation of a nano-scale hybrid plasmonic waveguide with a low-index as well as high-index gain medium is presented. The present hybrid plasmonic waveguide structure consists of a Si substrate, a buffer layer, a high-index dielectric rib, a low-index cladding, a low-index nano-slot, and an inverted metal rib. Due to the field enhancement in the nano-slot region, a gain enhancement is observed, i.e., the ratio partial derivative G/partial derivative g > 1, where g and G are the gains of the gain medium and the TM fundamental mode of the hybrid plasmonic waveguide, respectively. For a hybrid plasmonic waveguide with a core width of w(co) = 30nm and a slot height of h(slot) = 50nm, the intrinsic loss could be compensated when using a low-index medium with a moderate gain of 176dB/cm. When introducing the high-index gain medium for the hybrid plasmonic waveguide, a higher gain is obtained by choosing a wider core width. For the high-index gain case with h(slot) = 50nm and w(co) = 500nm, a gain of about 200dB/cm also suffices for the compensation of the intrinsic loss. (C) 2011 Optical Society of America
Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

hongson chu,erping li,ping bai,ravi s hegde

DOI: https://doi.org/10.1063/1.3437088

IF: 4

2010-01-01

Applied Physics Letters

Abstract:The single mode hybrid dielectric-loaded plasmonic waveguide is presented at the wavelength of 1.55 mu m. We show that this waveguiding structure, consisting of a low-index SiO2-stripe sandwiched between a high-index Si-nanowire and a silver film, achieves both long propagation length and strong field confinement with high power intensity. Components such as 90 degrees-circular and S-shaped bends, based on the proposed waveguide with an intensity confinement area of 50x200 nm(2), can obtain a total transmission efficiency exceeding 85% for various bend radii. Finally, we demonstrate that the efficient directional couplers can be developed using two coupled waveguides. In particular, we determine the typical coupling lengths and maximum transfer power for different structural parameters of the coupler. These investigations provide the foundations for the design of chip-scale integrated plasmonic circuitry. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3437088]
Plasmonically-Enhanced Mid-Infrared Photoluminescence in A Metal/Narrow-Gap Semiconductor Structure

Pengqi Lu,Chunfeng Cai,Bingpo Zhang,Bozhi Liu,Huizhen Wu,Gang Bi,Jianxiao Si

DOI: https://doi.org/10.1209/0295-5075/114/37005

2016-01-01

Abstract:We report the enhancement of the mid-infrared (MIR) luminescence intensity in a nanoscale metal/semiconductor structure by the coupling of surface plasmon polaritons (SPPs) with excitons in a narrow-gap semiconductor. The SPPs are efficiently excited by the total internal reflection photons at a metal/semiconductor interface. The intense electric field induced by SPPs, in turn, greatly changes the radiative recombination rates of the excitons generated by the pumping laser and thus the MIR luminescence intensity. The finding avails the understanding of fundamental science of SPs in narrow-gap semiconductors and the development of novel MIR devices. Copyright (C) EPLA, 2016
Design of hybrid structure for fast and deep surface plasmon polariton modulation.

Chenlei Pang,Hangwen Lu,Pengfei Xu,Haoliang Qian,Xiaowei Liu,Xu Liu,Haifeng Li,Qing Yang

DOI: https://doi.org/10.1364/OE.24.017069

IF: 3.8

2016-01-01

Optics Express

Abstract:The electric and optical performance of different surface plasmon polariton (SPP) electric modulation structures have been investigated by comparing the response speed and modulation figures of merit (FoM). To overcome the capacitance limitation and improve the response speed, we proposed a novel silver-graphene-dielectric-graphene-semiconductor vertical structure. Semiconductor nano-waveguide is introduced to help reduce ohmic loss in silver waveguide and reflect the leaked optical field back, enhancing the modulation depth. Through optimization, a device with estimated modulation FoM of more than 70% and hundreds of GHz response speed and 3 dB bandwidth is designed, which may bring great improvement to previous optical modulators. (C) 2016 Optical Society of America
Surface Plasmon Polariton Mode in the Metal-Insulator-metal Waveguide

Jun Zhu,Wenju Xu,Zhengjie Xu,Fu Deli,Song Shuxiang,Duqu Wei

DOI: https://doi.org/10.1016/j.ijleo.2017.01.047

IF: 3.1

2017-01-01

Optik

Abstract:Metal-insulator-metal (MIM) waveguides with subwavelength apertures exhibit unique properties that are considered breakthroughs in surface plasma technology. In this paper, we established a surface plasmon polariton (SPP) mode of MIM structure as well as a theoretical model of reflectivity and excitation coefficients to clarify the SPP mode structure. During simulation calculations, attenuation of the TM ground state mode with large-thickness dielectrics is over the oscillation mode, which is obviously different from the traditional dielectric waveguide. The TE mode exhibits characteristics of anamorphic dielectric optical waveguides, and its propagation distance is longer than that of the TM0 mode. With increasing length, the cavity quality factor Q increases, which indicates that the SPP reflection is limited. The quality factor of the cavity and the end-face have a close relationship. MIM waveguides with larger Q values can produce optical waves coupled with the SPP mode. In this paper, we analyzed SPP propagation constants and attenuation coefficients to promote the development of an integrated surface plasmon.
High performances of planar hybrid plasmonic waveguidebased structures

Hong-Son Chu,Ping Bai,Er-Ping Li

DOI: https://doi.org/10.1364/qels.2010.qmf4

2010-01-01

Abstract:We report a novel planar hybrid plasmonic waveguide which provides low propagation loss, strong mode confinement, high power and intensity in the nano-gap. The 90°-waveguide bends and couplers based on proposed waveguides are also discussed.
Nonreciprocal Magneto-Plasmonic Waveguide with Compact Metal-Sandwiched Structure

Jin Yi-Chang,Xu Chao,Qiu Hui-Ye,Xiang Le-Qiang,Yang Jian-Yi,Jiang Xiao-Qing

DOI: https://doi.org/10.1088/0256-307x/30/9/094203

2013-01-01

Abstract:A magneto-optical (MO) metal-sandwiched multilayered structure composed of metal, MO medium and dielectric buffer layers is presented and investigated by finite-element-method-based-mode solver and perturbation theory. The results show that this structure exhibits large nonreciprocal phase shift, strong mode confinement in the narrow buffer layers as well as very low propagation loss. The propagation length with 1 dB loss is much longer than the required length of pi/2 nonreciprocal phase shifts in this structure. The modal area is smaller than half of the conventional MO waveguides. This phenomenon can be used to achieve a compact plasmonic isolator based on the Mach-Zehnder interferometer.
Dye Gain Gold NW Array of Surface Plasmon Polariton Waveguide

Jun Zhu,Zhengjie Xu,Wenju Xu,Deli Fu,Duqu Wei

DOI: https://doi.org/10.1016/j.rinp.2017.02.006

IF: 4.565

2017-01-01

Results in Physics

Abstract:Plasmon lasers can support ultrasmall mode confinement and ultrafast dynamics with device feature sizes below the diffraction limit. At present in the single visible light frequency, the optical gain method of constraint SPP on metal nanowires structure reported less. We design the gold nanowire array structure, consisting of PMMA and R6G dye molecules as gain, by 488nm pump in the middle of the nanowires position for wide range of light, use symmetry broken overcome that momentum does not match the photonic and SPP energy conversion. Theoretical analysis shows that dyes provide coherent optical feedback, resulting in nanowires face will observe laser properties of surface plasmons. Feature analysis: the incident light and pump joint strength is greater than the sum of strength which is the incident light, pump respectively. Under the effect of dye molecules gain effective, length of SPP transmission can increase 1µm. The results achieved in a single optical frequency of stimulated radiation, application of dye optical gain can achieve continuous gain effect. This is for the future development of plasma amplifier and the wavelength laser.
Gain-assisted propagation of surface plasmon polaritons using electrically-pumped quantum wells as active medium

Ting Mei,Yicen Li,Hui Zhang,Ning Zhu,Daohua Zhang,Jinghua Teng

DOI: https://doi.org/10.1117/12.904638

2011-01-01

Abstract:Gain-assisted surface plasmon polaritons (SPPs) propagation is realized by electrical pumping the InGaAsP quantum wells (QWs) beneath the metal waveguide with asymmetric configuration. The long-range and short-range mode SPPs are analyzed theoretically and observed experimentally under different levels of current injection. It is demonstrated that among the complex SPP-coupled emission mechanisms, the short-range SPP is supported by stimulated amplification (SA) in electrically-pumped QWs, and increases robustly to as 1.6 times of the long-range mode SPP in output power over a travelling distance of 80 mu m. This stimulated SPP emission can be adopted for the minimization of the electrically controlled optical modulator.
Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

Hong-Son Chu,Ping Bai,Er-Ping Li,Wolfgang R. J. Hoefer

DOI: https://doi.org/10.1007/s11468-011-9239-y

IF: 2.726

2011-01-01

Plasmonics

Abstract:The key challenge of the plasmonic waveguide is to achieve simultaneously both the long propagation length and high confinement. The hybrid dielectric-loaded plasmonic waveguide consists of a SiO 2 stripe sandwiched between a Si-nanowire and a silver film and thus promises as a best candidate to overcome this challenge. We propose to exploit this unique property of this structure to design different high-efficient silicon-based plasmonic components including waveguide, power splitter, and wavelength-selective ring resonator. As a result, the proposed power splitter with a waveguide cross section ( λ 2 /60) and a strong mode confinement area (~ λ 2 /240) features a low power transmission loss (<0.4 dB) at the optimal arm length of 4 μm with respect to different separation distances of output arms. Moreover, we also demonstrate that a plasmonic ring resonator with a compact ring radius of 2 μm may achieve high optical performance such as high-extinction ratio of 30 dB, large free spectral range of 67 nm, and small bandwidth of 0.6 nm. These superior performances make them promising building blocks for integrated nanophotonic circuits.
Gain Enhancement in a V-shaped Plasmonic Slot Waveguide for Efficient Loss Compensation at the Subwavelength Scale

Yusheng Bian,Zheng,Xin Zhao,Pengfei Yang,Lei Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1016/j.optcom.2012.12.091

IF: 2.4

2013-01-01

Optics Communications

Abstract:An active plasmonic slot waveguide comprising an inverted triangular metal wedge incorporated inside a V-shaped plasmonic groove with a low-index gain medium embedded between them is presented, and its guiding properties are investigated numerically at the wavelength of 1550 nm. The presented waveguide is shown to be capable of supporting two fundamental plasmonic slot modes with high field localization to the V-shaped low-index slot region. Due to such strong optical confinement and significant field enhancement, the introduced gain in the slot could effectively compensate the propagation loss of the supported plasmonic modes. It is revealed that for the studied channel plasmonic slot and wedge plasmonic slot modes, notable gain enhancements are observable within a wide range of geometric parameters. For the considered structure with a 10-40 nm-wide slot, the enhancements of gain can be as large as 11%-159% for the CPS mode while 43%-174% for the WPS mode. These values could be further improved by adopting even narrower slots. It is shown that, by introducing a gain medium with coefficients around hundreds of cm(-1), the modal loss can be largely or even fully compensated, with a subwavelength mode area achievable simultaneously. These unique features of the studied V-shaped plasmonic slot waveguide might be useful for its potential applications in compact, active plasmonic components. (C) 2013 Elsevier B.V. All rights reserved.
Compact Surface Plasmon Amplifier in Nonlinear Hybrid Waveguide

Shu-shu Wang,Dan-qing Wang,Xiao-peng Hu,Tao Li,Shi-ning Zhu

DOI: https://doi.org/10.1088/1674-1056/25/7/077301

2016-01-01

Chinese Physics B

Abstract:Surface plasmon polariton（SPP）, a sub-wavelength surface wave promising for photonic integration, always suffers from the large metallic loss that seriously restricts its practical application. Here, we propose a compact SPP amplifier based on a nonlinear hybrid waveguide（a combination of silver, LiNbO3, and SiO2）, where a couple of Bragg gratings are introduced in the waveguide to construct a cavity. This special waveguide is demonstrated to support a highly localized SPP-like hybrid mode and a low loss waveguide-like hybrid mode. To provide a large nonlinear gain, a pumping wave input from the LiNbO3 waveguide is designed to resonate inside the cavity and satisfy the cavity phase matching to fulfill the optical parametric amplification（OPA） of the SPP signal. Proper periods of gratings and the cavity length are chosen to satisfy the impedance matching condition to ensure the high input efficiency of the pump wave from the outside into the cavity. In theoretical calculations, this device demonstrates a high performance in a very compact scheme（3.32 μm） and a much lower pumping power for OPA compared with single-pass pumping. To obtain a comprehensive insight into this cavity OPA, the influences of the pumping power, cavity length, and the initial phase are discussed in detail.
Hybrid Plasmon Polariton Guiding with Tight Mode Confinement in a V-shaped Metal/dielectric Groove

Yusheng Bian,Zheng,Xin Zhao,Lei Liu,Yalin Su,Jiansheng Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1088/2040-8978/15/5/055011

IF: 2.1

2013-01-01

Journal of Optics

Abstract:Plasmonic waveguides consisting of metallic grooves filled with low- and high-index dielectrics are proposed and the optical properties of guided plasmonic modes are investigated at a wavelength of 1550 nm. Numerical simulations reveal that the quasi-TE-like fundamental hybrid plasmonic mode exhibits strong localization near the low-index dielectric gap, along with pronounced local field enhancement and relatively small mode area. Moderate propagation loss can be achieved as well, corresponding to a propagation distance of around tens to hundreds of microns. The proposed hybrid plasmonic structure is compatible with the fabrication techniques of traditional channel plasmon polariton waveguides, and these structures could be employed as interesting building blocks for highly integrated photonic circuits.
Active Metal Strip Hybrid Plasmonic Waveguide with Low Critical Material Gain

Linfei Gao,Liangxiao Tang,Feifei Hu,Ruimin Guo,Xingjun Wang,Zhiping Zhou

DOI: https://doi.org/10.1364/oe.20.011487

IF: 3.8

2012-01-01

Optics Express

Abstract:An active metal strip hybrid plasmonic waveguide (MSHPW) using gain materials as loss compensation is proposed with an extremely simple fabrication procedure. Gain materials are introduced either in the low-index layer or in the high-index layer of MSHPW. The effects of waveguide dimensions and material gain coefficients on loss compensation are analyzed at the communication wavelength. For one configuration presented here, a critical material gain as low as 3.8cm(-1) is sufficient for fully compensation of the loss when using a high-index gain material. The active MSHPW with low critical material gain opens up opportunities for practical plasmonic devices in active applications such as amplifiers, sources, and modulators.
Hybrid Plasmonic Waveguide Incorporating an Additional Semiconductor Stripe for Enhanced Optical Confinement in the Gap Region

Yusheng Bian,Zheng,Xin Zhao,Lei Liu,Yalin Su,Jiansheng Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1088/2040-8978/15/3/035503

IF: 2.1

2013-01-01

Journal of Optics

Abstract:A hybrid plasmonic waveguide consisting of a thin high-index dielectric stripe embedded inside the gap between a metallic substrate and a semiconductor ridge is presented for the purpose of enhanced optical confinement in the gap. By engineering the key geometrical parameters of the stripe, both of the power ratios resided inside the whole gap and the silicon ridge can be enhanced greatly. A power confinement ratio as large as 0.54 in the overall gap region is achievable, for a structure with a 200 nm-wide, 90 nm-thick silicon-stripe embedded in the center of a 100 nm-thick silica gap, which is nearly 50% improvement over that of the corresponding conventional hybrid waveguide. Meanwhile, with the introduction of the 90 nm-thick silicon stripe, the effective mode area of the waveguide exhibits a reduction of 50%–60% with a reasonable propagation length around 25–65 μm for different stripe widths. A study on the influence of possible fabrication imperfections reveals that the modal property is quite robust and highly tolerant to these errors. Such a hybrid plasmonic waveguide with enhanced optical confinement and moderate modal loss may enable the realization of ultra-compact passive components, nanolasers with low pumping thresholds, and other potential applications.
Slot Waveguide Enhanced Field Confinement by CMOS-Compatible Hybrid Plasmonic Structures

Jing Xiao,Qi-qin Wei

DOI: https://doi.org/10.1109/ectc.2016.113

2016-01-01

Abstract:The surface plasmon polaritons (SPPs) have attracted considerable attention because of their ability to localize, confine, and guide electromagnetic energy at the subwavelength scale beyond the diffraction limit. Innovative waveguide structures, including slab, coaxial, dielectric-loaded and other waveguide components, have followed in the wake of the hybrid plasmonic because it features a simultaneous subwavelength mode confinement and relative long-range propagation. Here, We present an investigation of a novel slot waveguide consisting of two hybrid plasmonic strip with a metal-oxide-semiconductor structure which can be compatible with CMOS process. Compared to a structure with homogeneous high-refractive-index silicon embedded by slot, the two plasmonic structure provides strong optical field concentration for slot waveguide. Numerical simulations based on the finite-element method demonstrated that the hybrid plasmonic slot waveguide performs relatively high optical confinement ability, that is nearly twice as much as the traditional silicon waveguide's. Furthermore, the propagation length of proposed structure can reach 46.7 um. So, the proposed structure exhibits better tradeoff between mode confinement and propagation length because of the novel structure of the layers. The proposed waveguide can be exploited for on-chip integration of Si-based electronic circuits. The optical characteristics of a new Ag-silica-silicon-silica-slot-silicon-silica-Ag waveguide can be optimized by tuning the sizes of the layers. Optimal results showed that the proposed hybrid waveguide could achieve 2D tight mode confinement with relatively low propagation loss when the height of silicon is 125nm, the height of silica is 10nm, height of Ag is 40nm with its width is 200nm. Our proposed structure can be realized using a standard CMOS fabrication process and has the potential to enable the production of compact on-chip integration.
Silicon-Slot-Mediated Guiding of Plasmonic Modes: The Realization of Subwavelength Optical Confinement With Low Propagation Loss

Yusheng Bian,Zheng Zheng,Pengfei Yang,Jing Xiao,Guanjun Wang,Lei Liu,Jiansheng Liu,Jinsong Zhu,Tao Zhou

DOI: https://doi.org/10.1109/JSTQE.2013.2275899

2014-01-01

Abstract:Waveguiding platforms consisting of metallic nano-wires embedded inside vertical-type dielectric slot waveguides are proposed and the guiding properties are investigated at the telecom wavelength. It is shown that the characteristics of the plasmonic modes can be strongly modified owing to the existence of the silicon rails in close proximity to the metallic nanowire, which enables low-loss light guiding with subdiffraction-limited mode area. Systematical analysis regarding the variation of key geometric parameters has revealed that the symmetric hybrid mode can exist within a wide-range of physical dimensions, and demonstrates improved optical performance over either the conventional hybrid plasmonic mode or the fundamental plasmonic mode supported by a single metal nanowire. Furthermore, we show numerically that the supported symmetric and asymmetric modes can be separately excited through controlling the polarization state of the Gaussian beam that illuminated onto the nanowire tip. The presented hybrid waveguides naturally extend the capabilities of both the silicon slot and metal nanowire structures, which could facilitate a number of potential applications at the subwavelength scale.

Study of an SPP mode with gain medium based on a hybrid plasmonic structure

Plasmonic hybridized modes empowered by strong plasmon interaction in the nanograting-dielectric-metal stacked structure

SPP Waveguide of CdS Nanowires and Graphene Nanobelts

Modulator of surface plasmon polariton based cycle branch graphene waveguide

Gain enhancement in a hybrid plasmonic nano-waveguide with a low-index or high-index gain medium.

Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

Plasmonically-Enhanced Mid-Infrared Photoluminescence in A Metal/Narrow-Gap Semiconductor Structure

Design of hybrid structure for fast and deep surface plasmon polariton modulation.

Surface Plasmon Polariton Mode in the Metal-Insulator-metal Waveguide

High performances of planar hybrid plasmonic waveguidebased structures

Nonreciprocal Magneto-Plasmonic Waveguide with Compact Metal-Sandwiched Structure

Dye Gain Gold NW Array of Surface Plasmon Polariton Waveguide

Gain-assisted propagation of surface plasmon polaritons using electrically-pumped quantum wells as active medium

Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

Gain Enhancement in a V-shaped Plasmonic Slot Waveguide for Efficient Loss Compensation at the Subwavelength Scale

Compact Surface Plasmon Amplifier in Nonlinear Hybrid Waveguide

Hybrid Plasmon Polariton Guiding with Tight Mode Confinement in a V-shaped Metal/dielectric Groove

Active Metal Strip Hybrid Plasmonic Waveguide with Low Critical Material Gain

Hybrid Plasmonic Waveguide Incorporating an Additional Semiconductor Stripe for Enhanced Optical Confinement in the Gap Region

Slot Waveguide Enhanced Field Confinement by CMOS-Compatible Hybrid Plasmonic Structures

Silicon-Slot-Mediated Guiding of Plasmonic Modes: The Realization of Subwavelength Optical Confinement With Low Propagation Loss