Abstract:This work reports a brand‐new voltage‐readable 2T memory cell employing a NOT‐gate‐like architecture. It combines ferroelectric and nano‐floating‐gate transistors in a voltage divider, achieving high noise tolerance for voltage output memory. Moreover, the conceptual design of the 1T2T FeRAM cell is also developed as a prospect for low‐cost voltage‐readable memory technology in wearable electronic applications. Organic nonvolatile memory has been considered a low‐cost memory technology for flexible electronics and Internet‐of‐things (IoT). However, a major concern is the nonuniformity of memory units, which is primarily caused by random grain boundaries, interface defects, and charge traps, making it difficult to develop high‐density reliable memory arrays. This nonuniformity problem would induce read error, which is directly caused by the narrow distribution margin of memory states and low noise tolerance in conventional organic memory cells. To break this limitation, a novel 2T memory cell employing a NOT‐gate‐like architecture achieving self‐enhancing noise tolerance is presented. This unique cell consists of a pair of commonly‐gated memory transistors with contradictory "write‐and‐erase" features. It functions as a voltage divider, producing a well‐distinguished binary voltage output capability. The concept and design model of this brand‐new 2T memory cell is thoroughly discussed. It is originally characterized by noise‐tolerant memory cells irrespective of device nonuniformity. The noise tolerance range of this 2T memory cell is also investigated. The binary voltage‐readable memory state with a large noise tolerance range is obtained. Moreover, the conceptual design of the 1T2T FeRAM cell is further developed for low‐cost voltage‐readable memory technology in wearable electronic applications.

A 3-Bit Multilevel Cell Programming Method in Nitride Memory Devices

Low-Voltage and Low-Current Flash Memory Using Source Induced Band-to-Band Tunneling Hot Electron Injection to Perform Programming

An 8-Level 3-Bit Cell Programming Technique in Nor-Type Nano-Scaled Sonos Memory Devices

VDNROM: A novel four-bits-per-cell vertical channel dual-nitride-trapping- layer ROM for high density flash memory applications

VDNROM: A novel four-physical-bits/cell vertical channel dual-nitride-trapping-layers ROM for high density flash memory applications

An Improved Multilevel Cell Programming Technique for 4-Bits/cell Localized Trapping SONOS Memory Devices

ASAP: an Efficient and Reliable Programming Algorithm for Multi-level RRAM Cell

Program/erase Injection Current Characteristics of a Low-Voltage Low-Power NROM Using High-K Materials As the Tunnel Dielectric

Novel Silicon-Based Flash Cell Structures for Low Power and High Density Memory Applications

A Novel Flash Memory Using Band-to-Band Tunneling In duced Hot Electron Injection to Program

Novel flash memory using band-to-band tunneling induced hot electron injection to program

Improved Programming Efficiency Through Additional Boron Implantation at the Active Area Edge in 90 Nm Localized Charge-Trapping Non-volatile Memory

Novel Multi-Bit Non-Uniform Channel Charge Trapping Memory Device with Virtual-Source Nand Flash Array

Novel Vertical Channel Double Gate Structures for High Density and Low Power Flash Memory Applications.

Novel p-Channel Selected n-Channel Divided Bit-Line NOR Flash Memory Using Source Induced Band-to-Band Hot Electron Injection Programming

Ultrathin Nitride Ferroic Memory with Large ON/OFF Ratios for Analog In‐memory Computing

The Promising Multi-Bit/level Programming Operations for Nano-Scaled SONOS Memory

Improved performance of Si-NC memory using a novel two-step program scheme

A Novel Non-Planar Cell Structure for Flash Memory

Organic Nonvolatile 2T Memory Cell Employing a NOT‐Gate‐Like Architecture Toward Binary Output Level With Enhanced Noise Tolerance

A New Scalable Self-Aligned Dual-Bit Split-Gate Charge-Trapping Memory Device