Abstract:Numerous studies have demonstrated that under low-velocity, low-energy impact conditions, although the surface damage to fiber-reinforced composite laminates may be minimal, significant internal damage can occur. Consequently, a progressive damage finite element model was specifically developed for thermoplastic carbon fiber-reinforced composite laminates subjected to low-speed impact loads, with the objective of analyzing the damage behavior of laminates under impacts of varying energy levels. The model utilizes a three-dimensional Hashin criterion for predicting intralayer damage initiation, with cohesive elements based on bilinear traction-separation law for predicting interlaminar delamination initiation, and incorporates a damage constitutive model based on equivalent displacement to characterize fiber damage evolution, along with the B-K criterion for interlaminar damage evolution. The impact response of laminates at energy levels of 5 J, 10 J, 15 J, 20 J, and 25 J was analyzed through numerical simulation, drop-hammer experiments, and XCT non-destructive testing. The results indicated that the simulation outcomes closely correspond with the experimental findings, with both the predicted peak error and absorbed energy error maintained within a 5% margin, and the trends of the mechanical response curves aligning closely with the experimental data. The damage patterns predicted by the numerical simulations were consistent with the results obtained from XCT scans. The study additionally revealed that the impact damage of the laminates primarily stems from interlaminar delamination and intralayer tensile failure. Initial damage typically presents as internal delamination; hence, enhancing interlaminar bonding performance can significantly augment the overall load-bearing capacity of the laminate.

Analysis on micro-damages of carbon fibre intensity

Micro Failure Analysis of Fiber Metal Laminates

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

A Microcracking-Based Model for the Dynamic Failure of Carbon/carbon Composites

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Effect of Microcracks on the Tensile Properties of 3D Woven Composites

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Damage in Carbon Fiber/epoxy Resin Composites under Explosive Impact

Effects of various porosities on the damage evolution behavior of carbon fiber/epoxy composites using acoustic emission and micro-CT

Frictional Sliding of Microcracks under Compression

Damage Evolution and Multi-Scale Analysis of Carbon Fiber-Reinforced Cross-Ply Laminate with Thermal Residual Stress

Influence of Complex Geometries on Damage Tolerance of Porous Carbon Fiber Network

Prediction of the Inter-Fiber Mechanical Properties of Composites: Part I Standardization Micro-Scale Modelling Method and Damage Analysis

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Impact behaviors and damage mechanisms of 2.5D woven composites: Experiment and simulation

Improving Interlaminar Fracture Toughness and Impact Performance of Carbon Fiber/Epoxy Laminated Composite by Using Thermoplastic Fibers

Inherent relationship between process parameters, crystallization and mechanical properties of continuous carbon fiber reinforced peek composites

Damage Model of Carbon-Fiber-Reinforced Concrete Based on Energy Conversion Principle

Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose γ-rays